Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) › from 2016.08
RM25T0E _58 Vehicle Interior _029930 SEAT _0289746 FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) A

SEAT  FRONT SEAT ASSEMBLY(for Separate Seat Type with Inner Belt Attached)  INSTALLATION  


CAUTION / NOTICE / HINT

CAUTION:
·

Wear protective gloves. Sharp areas on the parts may injure your hands.



HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 1.INSTALL FRONT SEAT ASSEMBLY RH

a.

Place the front seat assembly RH in the vehicle.

NOTICE:

Be careful not to damage the vehicle body.



b.
B452666

Attach the wire harness clamp and connect the connector.


c.

Temporarily install the front seat assembly RH with the 4 bolts.


d.

Operate the seat track adjusting handle to move the seat to the rearmost position.


e.
B456587N01
2.958,0.563 3.229,0.781 0.271,0.219 10 true (1) 2.177,1.375 2.458,1.615 0.281,0.24 10 true (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


f.

Operate the seat track adjusting handle to move the seat to the frontmost position.


g.
B456586N01
2.396,0.271 2.656,0.5 0.26,0.229 10 true (1) 2.115,1.438 2.375,1.667 0.26,0.229 10 true (2)

Tighten the 2 bolts in the order shown in the illustration.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 71910A 2.INSTALL FRONT SEAT HEADREST ASSEMBLY

a.

Install the front seat headrest assembly.