Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) › from 2016.08
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0290011 FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached) G

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY(for Separate Seat Type with Inner Belt Attached)  INSPECTION  


PROCEDURE

Hide 73230 1.INSPECT FRONT SEAT INNER BELT ASSEMBLY RH

a.
B276073C06
0.042,0 0.292,0.25 0.25,0.25 10 false *a
*a Component without harness connected
(Front Seat Inner Belt Assembly RH)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
2 - 3 Seat belt unfastened Below 1 Ω
2 - 3 Seat belt fastened 10 MΩ or higher


If the result is not as specified, replace the front seat inner belt assembly RH.


Hide 73240 2.INSPECT FRONT SEAT INNER BELT ASSEMBLY LH

a.

Measure the resistance according to the value(s) in the table below.

B405991C01
2.563,0.906 2.979,1.323 true 2.354,0.906 1.854,1.313 true 2.271,0.125 2.583,0.281 0.313,0.156 10 false *a 4.406,0.208 4.719,0.365 0.313,0.156 10 false *b 0.073,0.063 0.385,0.219 0.313,0.156 10 false *c 3.063,1.313 3.219,1.469 0.156,0.156 10 false E 1.677,1.302 1.833,1.5 0.156,0.198 10 false +
*a Connector A *b Connector B
*c Component without harness connected
(Front Seat Inner Belt Assembly LH)
- -


Standard Resistance:
Tester Connection Condition Specified Condition
A-3(+) - B-1 Seat belt unfastened Below 1 Ω
A-3(+) - B-1 Seat belt fastened 10 kΩ or higher
A-2(E) - B-3 Always Below 1 Ω


If the result is not as specified, replace the front seat inner belt assembly LH.