89871A 1.REMOVE INJECTOR DRIVER
w/ DPF:
Disconnect the connectors and detach the clamp.
| *a | Push |
| *b | Lock |
Raise the levers while pushing the locks on the levers and disconnect the connectors.
Detach the clamps.
Remove the 3 bolts and injector driver assembly.
| *1 | No. 1 Injector Driver |
| *2 | No. 2 Injector Driver |
Remove the 2 bolt and disconnect the No. 1 injector driver and No. 2 injector driver.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Remove the 4 screws and disconnect the No. 1 injector driver from the injector driver bracket.
| *1 | No. 2 Injector Driver |
| *2 | Injector Driver Bracket |
Remove the 4 screws and disconnect the No. 2 injector driver from the injector driver bracket.
w/o DPF:
Disconnect the connectors and detach the clamp.
| *a | Push |
| *b | Lock |
Raise the levers while pushing the locks on the levers and disconnect the connectors.
Detach the clamps.
Remove the 3 bolts and injector driver assembly.
| *1 | No. 1 Injector Driver |
| *2 | No. 2 Injector Driver |
Remove the 2 bolt and disconnect the No. 1 injector driver and No. 2 injector driver.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Remove the 4 screws and disconnect the No. 1 injector driver from the injector driver brackets.
| *1 | No. 2 Injector Driver |
| *2 | Injector Driver Bracket |
Remove the 4 screws and disconnect the No. 2 injector driver from the injector driver bracket.