Home › Engine / Hybrid System › 1VD-FTV (FUEL) › INJECTOR DRIVER › 2016.08–2017.01
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135402 INJECTOR DRIVER A

1VD-FTV FUEL  INJECTOR DRIVER  INSTALLATION  


PROCEDURE

Hide 89871A 1.INSTALL INJECTOR DRIVER

a.

w/ DPF:

i.
A391448C01
2.198,1.167 2.833,0.99 true 0.615,0.344 1.188,0.594 true 0.458,0.24 0.771,0.396 0.313,0.156 10 false *1 2.854,0.875 3.167,1.031 0.313,0.156 10 false *2
*1 No. 2 Injector Driver
*2 Injector Driver Bracket


Install the No. 2 injector driver to the injector driver bracket with the 4 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


ii.
A391447C01
2.135,1.063 2.719,0.854 true 0.615,1.208 1.615,1.333 true 0.448,1.094 0.76,1.25 0.313,0.156 10 false *1 2.75,0.729 3.063,0.885 0.313,0.156 10 false *2
*1 No. 1 Injector Driver
*2 Injector Driver Bracket


Install the No. 1 injector driver to the injector driver bracket with the 4 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


iii.
A391446C01
1.302,0.521 1.813,0.896 true 2.719,0.552 2.979,0.25 true 1.146,0.365 1.458,0.521 0.313,0.156 10 false *1 2.948,0.104 3.26,0.26 0.313,0.156 10 false *2
*1 No. 1 Injector Driver
*2 Injector Driver Bracket


Connect the No. 1 injector driver and No. 2 injector driver with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


iv.
A391445N01
2.583,0.469 2.708,0.646 0.125,0.177 10 true 1 0.521,1.604 0.656,1.781 0.135,0.177 10 true 2 1.24,0.24 1.375,0.417 0.135,0.177 10 true 3

Install the injector driver assembly with the 3 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



v.
A391444

Attach the clamps.


vi.
A391585

Connect the connectors and lower the levers.

NOTICE:
·

When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and connector.

·

Make sure that the levers are securely lowered.




vii.
A391443

Connect the connectors and attach the clamp.



b.

w/o DPF:

i.
A391455C01
2.156,1.063 2.677,0.875 true 0.646,0.375 1.208,0.49 true 0.469,0.281 0.781,0.438 0.313,0.156 10 false *1 2.719,0.76 3.031,0.917 0.313,0.156 10 false *2
*1 No. 2 Injector Driver
*2 Injector Driver Bracket


Install the No. 2 injector driver to the injector driver bracket with the 4 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


ii.
A391454C01
2.156,0.958 2.76,0.74 true 0.594,1.125 1.583,1.281 true 0.427,1.01 0.74,1.167 0.313,0.156 10 false *1 2.792,0.615 3.104,0.771 0.313,0.156 10 false *2
*1 No. 1 Injector Driver
*2 Injector Driver Bracket


Install the No. 1 injector driver to the injector driver bracket with the 4 screws.

Torque:
2.0 N*m (20 kgf*cm, 18 in.*lbf)


iii.
A391453C01
1.208,0.385 1.875,0.802 true 2.875,0.667 3.125,0.344 true 1.042,0.26 1.354,0.417 0.313,0.156 10 false *1 3.104,0.167 3.344,0.323 0.24,0.156 10 false *2
*1 No. 1 Injector Driver
*2 Injector Driver Bracket


Connect the No. 1 injector driver and No. 2 injector driver with the 2 bolts.

Torque:
8.0 N*m (82 kgf*cm, 71 in.*lbf)


iv.
A391452N01
2.479,0.333 2.604,0.5 0.125,0.167 10 true 1 0.479,1.656 0.604,1.823 0.125,0.167 10 true 2 1.188,0.188 1.313,0.344 0.125,0.156 10 true 3

Install the injector driver assembly with the 3 bolts.

Torque:
12.5 N*m (127 kgf*cm, 9 ft.*lbf)

HINT:

Tighten the bolts in the order shown in the illustration.



v.
A391451

Attach the clamps.


vi.
A391585

Connect the connectors and lower the levers.

NOTICE:
·

When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and connector.

·

Make sure that the levers are securely lowered.




vii.
A391450

Connect the connectors and attach the clamp.