Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › MASS AIR FLOW METER(w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0290248 MASS AIR FLOW METER(w/ DPF) G

1VD-FTV ENGINE CONTROL  MASS AIR FLOW METER(w/ DPF)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER SUB-ASSEMBLY

a.

Turn the ignition switch to ON (do not start the engine).


b.

Enter the following menus: Powertrain / Engine / Data List / Primary / MAF.

Powertrain > Engine and ECT > Data List
Tester Display
MAF
50003 234 3

c.
A204312

Blow air into the mass air flow meter sub-assembly and check that the value of mass air flow sensor fluctuates.

OK:

The value changes.


If the result is not as specified, replace the mass air flow meter sub-assembly.