Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › MASS AIR FLOW METER(w/o DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0290249 MASS AIR FLOW METER(w/o DPF) G

1VD-FTV ENGINE CONTROL  MASS AIR FLOW METER(w/o DPF)  ON-VEHICLE INSPECTION  


CAUTION / NOTICE / HINT

PROCEDURE

Hide 22204 1.CHECK MASS AIR FLOW METER

a.

Turn the ignition switch to ON (do not start the engine).


b.

Enter the following menus: Power train / Engine and ECT / Data List / MAF.

Powertrain > Engine and ECT > Data List
Tester Display
MAF
50003 61 319

c.
A230347C04
0,0 0,0 false
V100135

Air


Blow air into the mass air flow meter and check that the value of mass air flow sensor fluctuates.

OK:

The value changes.


If the result is not as specified, clean the mass air flow meter.

Click hereEngine / Hybrid System>1VD-FTV (ENGINE CONTROL)>MASS AIR FLOW METER(w/o DPF)>INSPECTION

After cleaning (air blowing) the mass air flow meter, perform an on-vehicle inspection of the mass air flow meter again and replace the mass air flow meter if the result is not as specified.