Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › AIR FUEL RATIO SENSOR (for DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0290250 AIR FUEL RATIO SENSOR(for DPF) G

1VD-FTV ENGINE CONTROL  AIR FUEL RATIO SENSOR(for DPF)  INSPECTION  


PROCEDURE

Hide 89467B 1.INSPECT AIR FUEL RATIO SENSOR

a.
A388264C01
0.698,0.688 0.948,0.688 0.948,0.688 1.427,1 true 2.76,0.594 2.5,0.594 2.5,0.594 2,0.99 true 0.875,1.646 1.115,1.646 1.115,1.646 1.458,1.375 true 0.083,0.083 0.396,0.24 0.313,0.156 10 false *a 0.458,0.615 1.01,1.031 0.552,0.417 10 false +B 0.49,1.563 1.031,1.938 0.542,0.375 10 false AF1- 2.833,0.521 3.302,0.833 0.469,0.313 10 false HAF1
*a Component without harness connected
(Air Fuel Ratio Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 (HAF) - 2 (+B) 20 °C (68 °F) 1.8 to 3.4 Ω
1 (HAF) - 4 (AF1-) Always 10 kΩ or higher


If the result is not as specified, replace the air fuel ratio sensor.