Home › Engine / Hybrid System › 1HZ (FUEL) › FUEL SUB TANK(for Double Tank Type) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029893 1HZ FUEL _0136499 FUEL SUB TANK(for Double Tank Type) A

1HZ FUEL  FUEL SUB TANK(for Double Tank Type)  INSTALLATION  


PROCEDURE

Hide 77011 1.INSTALL LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.

Install a new gasket and the lower fuel tank filler pipe sub-assembly to the fuel sub tank with the 6 screws.

Torque:
3.5 N*m (36 kgf*cm, 31 in.*lbf)


Hide 2.INSTALL FUEL SUCTION TUBE ASSEMBLY

a.

Install a new gasket and the fuel suction tube assembly to the fuel sub tank with the 5 screws.

Torque:
1.5 N*m (15 kgf*cm, 13 in.*lbf)


Hide 4.INSTALL FUEL SUB TANK

a.

Set the fuel sub tank and fuel tank protector on an engine lifter.


b.

Raise the engine lifter.


c.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


d.

Connect the fuel sender gauge connector.


Hide 77100D 5.CONNECT FUEL BREATHER HOSE

a.

Connect the fuel breather hose to the fuel sub tank, and slide the clamp to secure the hose.


Hide 77213 6.CONNECT INLET FUEL HOSE

a.

Connect the inlet fuel hose to the lower fuel tank filler pipe sub-assembly, and slide the clamp to secure the hose.


Hide 7.CONNECT FUEL RETURN HOSE

a.

Connect the fuel return hose to the fuel suction tube assembly, and slide the clamp to secure the hose.


Hide 8.CONNECT FUEL MAIN HOSE

a.

Connect the fuel main hose to the fuel suction tube assembly, and slide the clamp to secure the hose.