Home › Engine / Hybrid System › 1VD-FTV (FUEL) › COMMON RAIL (w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0290476 COMMON RAIL(w/ DPF) G

1VD-FTV FUEL  COMMON RAIL(w/ DPF)  INSPECTION  


PROCEDURE

Hide 23820A 1.INSPECT COMMON RAIL ASSEMBLY LH

a.

Inspect the pressure discharge valve.

i.

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 20°C (68°F) 0.96 to 1.16 Ω


If the result is not as specified, replace the common rail assembly LH.



Hide 23810A 2.INSPECT COMMON RAIL ASSEMBLY RH

a.

Inspect the fuel pressure sensor.

i.
A168059C01
0.125,0.125 0.333,0.333 0.208,0.208 10 false *a
*a Component without harness connected
(Fuel Pressure Sensor)


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1 - 2 25°C (77°F) 16.4 kΩ or less
2 - 3 25°C (77°F) 3 kΩ or less


If the result is not as specified, replace the common rail RH.