58325E 1.REMOVE REAR FLOOR SERVICE HOLE COVER (for Model Code #J76 Series)
Remove the 2 screws and rear floor service hole cover.
77100 2.REMOVE FUEL TANK ASSEMBLY (for Model Code #J79 Series)
3.REMOVE FUEL SENDER GAUGE ASSEMBLY
If an fuel sender gauge assembly is removed from the fuel tank assembly, replace the fuel sender gauge assembly with a new one.
for Model Code #J76 Series:
Disconnect the fuel sender gauge connector.
for Model Code #J76 Series:
Detach the wire harness clamp from the frame.
Detach the wire harness clamp from the fuel tank assembly.
Remove the 5 screws and fuel sender gauge assembly.