Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EGR VALVE (w/ DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029525 1VD-FTV EMISSION CONTROL _0290813 EGR VALVE(w/ DPF) G

1VD-FTV EMISSION CONTROL  EGR VALVE(w/ DPF)  INSPECTION  


PROCEDURE

Hide 25800 1.VISUAL CHECK ELECTRIC EGR CONTROL VALVE ASSEMBLY

a.

Visually check the electric EGR control valve assembly for deposits.

If there are deposits, clean the electric EGR control valve assembly.

NOTICE:
·

When cleaning the electric EGR control valve assembly, make sure the valve is completely closed.

·

Do not forcibly open the valve as it may be damaged or deformed.

·

When cleaning the electric EGR control valve assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage the part.




b.
A246266C03
0.76,3.302 0.76,2.75 0.76,2.75 0.604,2.75 true 3,2.49 2.76,2.49 2.76,2.49 2.76,3.229 true 2.177,4.458 2.354,4.458 2.354,4.458 2.552,3.854 true 0.448,2.635 1.76,3.01 1.313,0.375 10 false A 2.573,4.427 2.813,4.656 0.24,0.229 10 false *c 3.063,2.396 3.292,2.625 0.229,0.229 10 false *a 0.854,4.427 1.427,4.646 0.573,0.219 10 false *b 2,4.365 3.188,4.615 1.188,0.25 10 false *a
*a Gap
*b CORRECT
*c INCORRECT


Hold the electric EGR control valve assembly up to a light, and then from the side indicated by the arrow in the illustration, visually check that there is no gap between the valve and body.

OK:

No light passes through (there is no gap between the valve and body).


If light passes through (there is a gap between the valve and body), replace the electric EGR control valve assembly.

HINT:

Light passes through part A shown in the illustration even if the valve is completely closed. This is not a problem.



Hide 25630 2.INSPECT NO. 2 EGR VALVE ASSEMBLY

NOTICE:
·

Do not forcibly open the valve as it may be damaged or deformed.

·

When cleaning the No. 2 EGR valve assembly, use a piece of cloth soaked with cleaning solvent. Spraying the solvent directly onto this part or soaking the part in solvent may damage the part.



a.
A391363

When a vacuum of 69.7 kPa (523 mmHg, 20.6 in.Hg) is applied to the diaphragm chamber, check that the valve turns and air flows out.


b.

Maintaining the above conditions, check that there are no leaks and the valve does not return.


c.

Check that the valve does not have heavy carbon deposits and is not stuck.

If necessary, replace the No. 2 EGR valve assembly.