25630 1.INSTALL NO. 2 EGR VALVE ASSEMBLY
Install a new gasket to the EGR cooler assembly in the illustration.
Install the No. 2 EGR valve assembly to the EGR cooler assembly.
Install a new gasket to the No. 2 EGR valve assembly in the illustration.
Install the No. 3 EGR pipe with the 2 nuts and 2 bolts.
25601 2.INSTALL NO. 1 EGR PIPE SUB-ASSEMBLY
Install a new gasket to the No. 1 EGR pipe sub-assembly.
Make sure that the claw of the gasket faces the No. 1 EGR pipe sub-assembly.
Temporarily install the No. 1 EGR pipe sub-assembly with the 2 bolts.
1628A 3.INSTALL NO. 6 WATER BY-PASS PIPE WITH NO. 7 WATER BY-PASS HOSE
Connect the No. 7 water by-pass hose to the No. 2 EGR valve assembly, slide the clamp to secure the hose, and then install the No. 6 water by-pass pipe with No. 7 water by-pass hose.
25680 4.INSTALL EGR COOLER SUB-ASSEMBLY
Install 2 new gaskets to the No. 1 EGR pipe sub-assembly.
Make sure that the claw of the gasket faces the No. 1 EGR pipe sub-assembly.
Temporarily install the EGR cooler sub-assembly with the 10 bolts.
Tighten the 2 bolts labeled A.
Tighten the 2 bolts labeled B.
Tighten the 2 bolts labeled C.
Tighten the 4 bolts labeled D.
Tighten the 2 bolts labeled E.
Connect the No. 2 vacuum transmitting hose assembly to the No. 2 EGR valve assembly.
Connect the No. 6 water by-pass hose to the No. 6 water by-pass pipe, and slide the clamp to secure the hose.
Connect the 2 No. 8 water by-pass hoses to the EGR cooler sub-assembly, and slide the 2 clamps to secure the 2 hoses.
Install the No. 9 water by-pass hose to the No. 2 EGR valve assembly, and slide the clamp to secure the hose.
Install the No. 4 water by-pass hose to the EGR cooler sub-assembly, and slide the clamp to secure the hose.
17114D 5.INSTALL NO. 3 INTAKE MANIFOLD