Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EXHAUST GAS TEMPERATURE SENSOR (for DPF) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029525 1VD-FTV EMISSION CONTROL _0290815 EXHAUST GAS TEMPERATURE SENSOR(for DPF) A

1VD-FTV EMISSION CONTROL  EXHAUST GAS TEMPERATURE SENSOR(for DPF)  REMOVAL  


CAUTION / NOTICE / HINT

CAUTION:

To prevent burns, do not touch the engine, exhaust manifold or other high temperature components while the engine is hot.


PROCEDURE

Hide 89425 1.REMOVE EXHAUST GAS TEMPERATURE SENSOR

NOTICE:

If the exhaust gas temperature sensor is dropped, replace it with a new one.


a.
A391343

Disconnect the connector and clamp.


b.

Using a 14 mm union nut wrench, remove the exhaust gas temperature sensor.


Hide 89425A 2.REMOVE NO. 2 EXHAUST GAS TEMPERATURE SENSOR

NOTICE:

If the No. 2 exhaust gas temperature sensor is dropped, replace it with a new one.


a.

w/o Insulator:

i.
A391344

Disconnect the connector and clamp.


ii.

Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.



b.

w/ Insulator:

i.
A492958C01
2.125,1.635 2.292,1.635 true 1.667,1.083 1.833,1.083 1.833,1.083 2.021,1.438 true 2.354,1.563 2.604,1.729 0.25,0.167 10 true *1 1.479,1 1.729,1.167 0.25,0.167 10 true *a
*1 Exhaust Gas Sensor Insulator
*a Plate


Disconnect the connector and clamp.


ii.

Remove the clip.


iii.

Slide the plate and exhaust gas sensor insulator


iv.

Using a 14 mm union nut wrench, remove the No. 2 exhaust gas temperature sensor.


v.

Remove the exhaust gas sensor insulator.



Hide 89425B 3.REMOVE NO. 3 EXHAUST GAS TEMPERATURE SENSOR

NOTICE:

If the No. 3 exhaust gas temperature sensor is dropped, replace it with a new one.


a.

w/o Insulator:

i.
A391345

Disconnect the connector and clamp.


ii.

Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.



b.

w/ Insulator:

i.
A492959C01
1.667,1.5 1.833,1.5 true 1.135,1.146 1.302,1.146 1.302,1.146 1.469,1.396 true 1.875,1.417 2.125,1.583 0.25,0.167 10 true *1 0.938,1.063 1.188,1.229 0.25,0.167 10 true *a
*1 Exhaust Gas Sensor Insulator
*a Plate


Disconnect the connector and clamp.


ii.

Remove the clip.


iii.

Slide the plate and exhaust gas sensor insulator


iv.

Using a 14 mm union nut wrench, remove the No. 3 exhaust gas temperature sensor.


v.

Remove the exhaust gas sensor insulator.