Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM › 2016.08–2021.07
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0138409 SEAT BELT WARNING SYSTEM U

SEAT BELT  SEAT BELT WARNING SYSTEM  TERMINALS OF ECU  


CHECK COMBINATION METER ASSEMBLY


E192526N01
1.938,0.333 2.438,0.583 0.5,0.25 4.896,0.333 5.396,0.583 0.5,0.25 2.083,0.375 2.542,0.573 0.458,0.198 10 false L26 5.021,0.375 5.479,0.573 0.458,0.198 10 false L25

a.

Disconnect the L25 combination meter assembly connector.


b.

Measure the resistance and voltage according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L25-15 (ES) - Body ground BR - Body ground Ground Always Below 1 Ω
L25-26 (B) - Body ground R - Body ground Battery power supply Always 11 to 14 V
L25-28 (B) - Body ground B-Y - Body ground IG power supply Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V


c.

Reconnect the L25 combination meter assembly connector.


d.

Measure the voltage and check for pulses according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
L25-9 (SI) - Body ground*2 G-R - Body ground Speed signal (input) Ignition switch ON, wheel turned slowly Pulse generation
L26-13 (CANH)*3 G CAN communication line - -
L26-14 (CANL)*3 W CAN communication line - -
L25-22 (P/SB) - Body ground*1 G - Body ground Front passenger side seat belt warning light signal Front passenger seat occupied, seat belt fastened 11 to 14 V
Front passenger seat occupied, seat belt unfastened Below 1 V
L25-20 (PKBI) - Body ground R-W - Body ground Parking brake switch assembly signal Parking brake switch assembly on Parking brake switch assembly off
Parking brake switch assembly off 11 to 14 V
L26-15 (BLP) - Body ground R-B - Body ground Back-up light switch signal Ignition switch ON, shift lever in R 11 to 14 V
Ignition switch ON, shift lever any position other than in R Below 1 V
L25-21 (SW) - Body ground P - Body ground Seat belt warning light signal Ignition switch ON, driver side seat buckle switch is fastened 11 to 14 V
Ignition switch ON, driver side seat buckle switch is unfastened Below 1 V

*1: w/ Front Passenger Side Seat Belt Warning System

*2: w/o VSC

*3: w/ VSC