Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY(for Canvas Top) › from 2016.08
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138216 REAR COMBINATION LIGHT ASSEMBLY(for Canvas Top) A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY(for Canvas Top)  DISASSEMBLY  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81561A 1.REMOVE REAR COMBINATION LIGHT LENS LH (for Rear Bumper Side)

a.
E297539

Remove the 2 screws and rear combination light lens LH from the rear combination light body LH.


Hide 81550B 2.REMOVE REAR COMBINATION LIGHT BULB (Tail and Stop Light)

a.

for Rear Body Side:

i.
E296848C02
2.115,0.917 2.219,0.458 2.219,0.458 2.979,0.458 true 1.823,1.344 2.99,1.344 true 3.052,1.24 3.292,1.448 0.24,0.208 10 false *a 3.042,0.354 3.354,0.51 0.313,0.156 10 false *b
*a Base Point
*b Unlock Position Mark
V100135

Counterclockwise


Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.


ii.
E296853C01
0,0 0,0 false
V100135

Push
V100137

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.

for Rear Bumper Side:

i.
E298634C01
0,0 0,0 false
V100135

Push
V100136

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.



Hide 81550D 3.REMOVE REAR COMBINATION LIGHT BULB (for Backup Light)

a.
E296946C02
2.198,1.281 2.75,1.281 true 2.375,1.01 2.625,0.74 2.625,0.74 2.875,0.74 true 2.813,1.188 3.125,1.344 0.313,0.156 10 false *a 2.917,0.646 3.135,0.865 0.219,0.219 10 false *b
*a Base Point
*b Unlock Position Mark
V100135

Counterclockwise


Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.


b.
E296853C01
0,0 0,0 false
V100135

Push
V100137

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.


Hide 81550D 4.REMOVE REAR COMBINATION LIGHT BULB (for Rear Turn Signal Light)

a.

for Rear Body Side:

i.
E296947C02
2.073,1.438 2.625,1.438 true 2.229,1.042 2.781,1.042 true 2.688,1.344 3,1.5 0.313,0.156 10 false *a 2.844,0.938 3.156,1.094 0.313,0.156 10 false *b
*a Base Point
*b Unlock Position Mark
V100135

Counterclockwise


Turn the bulb socket counterclockwise until the base point is aligned with the unlock position mark to disconnect the bulb socket from the rear combination light lens LH.


ii.
E296853C01
0,0 0,0 false
V100135

Push
V100137

Counterclockwise


Push the side turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.



b.

for Rear Bumper Side:

i.
E298637C01
0,0 0,0 false
V100135

Push
V100136

Counterclockwise


Push the rear combination light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the rear combination light body LH.



Hide 81565 5.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY LH (for Rear Body Side:)

a.
E296948

Detach the wire harness clamp and remove the rear combination light socket and wire sub-assembly LH from the rear combination light lens LH.


Hide 81562A 6.REMOVE REAR COMBINATION LIGHT GASKET LH (for Rear Bumper Side)

a.
E298639

Remove the rear combination light gasket LH from the rear combination light body LH.


Hide 81569A 7.REMOVE REAR COMBINATION LIGHT BRACKET LH (for Rear Bumper Side, w/ Bracket)

a.
E303112

Detach the wire harness clamp.


b.

Remove the screw and rear combination light bracket LH from the rear combination light body LH.


Hide 81567B 8.REMOVE REAR COMBINATION LIGHT PROTECTOR LH (for Rear Bumper Side)

a.
E303111

Remove the screw and rear combination light protector LH from the rear combination light body LH.


Hide 81566 9.REMOVE REAR COMBINATION LIGHT RIM LH (for Rear Bumper Side)

a.
E303113

Remove the 3 screws and rear combination light rim LH from the rear combination light body LH.