| Part Tightened | N*m | kgf*cm | in.*lbf | |||
|---|---|---|---|---|---|---|
| No. 1 air cleaner inlet bracket x No. 2 air cleaner inlet bracket | 6.5 | 66 | 58 | |||
| Cool air intake pipe x Body | 6.5 | 66 | 58 | |||
| No. 2 cool air intake duct x Body | 6.5 | 66 | 58 | |||
| Cool air inlet duct x No. 2 cool air intake duct | 4.0 | 41 | 35 | |||
| No. 2 air cleaner inlet bracket x Body | 6.5 | 66 | 58 | |||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 2 intake manifold x Cylinder head | 21 | 214 | 15 | ||||
| No. 1 intake manifold x Starter hose bracket x Cylinder head | 21 | 214 | 15 | ||||
| Starter hose bracket x Cylinder head | 10 | 102 | 7 | ||||
| No. 1 intake manifold x No. 1 fuel pipe clamp | 10 | 102 | 7 | ||||
| No. 1 water by-pass pipe x Cylinder block | 58.8 | 600 | 43 | ||||
| No. 1 water by-pass pipe x Cylinder head | 10 | 102 | 7 | ||||
| No. 3 intake manifold x No. 1 intake manifold and No. 2 intake manifold | 21 | 214 | 15 | ||||
| No. 5 injection pipe sub-assembly x Fuel supply pump | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| No. 2 injection pipe clamp x No. 5 injection pipe sub-assembly | 5.0 | 51 | 44 | ||||
| Fuel filter to injection pump fuel pipe sub-assembly x Fuel supply pump | 12.3 | 125 | 9 | ||||
| Fuel filter to injection pump fuel pipe sub-assembly x Cylinder head LH | 10 | 102 | 7 | ||||
| No. 2 fuel pipe sub-assembly x Common rail LH | 29 | 296 | 21 | ||||
| No. 2 fuel pipe sub-assembly x No. 3 intake manifold | 10 | 102 | 7 | ||||
| No. 3 nozzle leakage pipe x No. 1 and No. 2 nozzle leakage pipe | 21 | 214 | 15 | ||||
| No. 3 nozzle leakage pipe x Intake pipe and Fuel hose bracket | 21 | 214 | 15 | ||||
| Injection pipe LH x Common rail and fuel injection | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| Injection pipe RH x Common rail and fuel injection | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| No. 6 Injection pipe sub-assembly x Common rail | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| No. 6 Injection pipe sub-assembly x Intake pipe | 5.0 | 51 | 44 | ||||
| No. 3 intercooler support bracket x Intake pipe | 21 | 214 | 15 | ||||
| Engine wire x Engine | 10 | 102 | 7 | ||||
| Fuel pump motor wire x No. 3 intake manifold | 10 | 102 | 7 | ||||
| No. 4 water by-pass pipe x Cylinder head | 10 | 102 | 7 | ||||
| Vacuum pump to connector tube | for bolt A | 21 | 214 | 15 | |||
| for bolt B | 10 | 102 | 7 | ||||
| No. 2 engine wire x Cylinder head | for bolt A | 32 | 326 | 24 | |||
| for bolt B | 13 | 133 | 10 | ||||
| Vacuum reservoir connect tube x Cylinder head | for bolt A | 21 | 214 | 15 | |||
| for bolt B | 10 | 102 | 7 | ||||
| No. 2 engine oil dipstick guide x Cylinder head cover | 10 | 102 | 7 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| No. 2 intake manifold x Cylinder head | 21 | 214 | 15 | ||||
| No. 1 intake manifold x Starter hose bracket x Cylinder head | 21 | 214 | 15 | ||||
| No. 1 water by-pass pipe x Cylinder block | 58.8 | 600 | 43 | ||||
| No. 1 water by-pass pipe x Cylinder head | 10 | 102 | 7 | ||||
| No. 3 intake manifold x No. 1 intake manifold and No. 2 intake manifold | 21 | 214 | 15 | ||||
| Intake pipe x No. 3 intake manifold | 21 | 214 | 15 | ||||
| Intake pipe x No. 4 EGR pipe | 21 | 214 | 15 | ||||
| No. 3 EGR pipe x No. 4 EGR pipe | 21 | 214 | 15 | ||||
| Fuel filter to injection pipe sub-assembly x Cylinder head cover | 10 | 102 | 7 | ||||
| No. 5 fuel pipe sub-assembly x Fuel supply pump | for union bolt | 12.3 | 125 | 9 | |||
| for nut | 10 | 102 | 7 | ||||
| No. 2 injection pipe clamp x No. 5 fuel pipe sub-assembly | 5.0 | 51 | 44 | ||||
| No. 6 injection pipe sub-assembly x Common rail | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| Injection pipe LH x Common rail and fuel injection | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| Injection pipe RH x Common rail and fuel injection | Specified tightening torque | 34 | 347 | 25 | |||
| for use with union nut wrench | 29.1 | 297 | 21 | ||||
| No. 3 intercooler support bracket x Intake pipe | 21 | 214 | 15 | ||||
| Engine wire x Engine | 10 | 102 | 7 | ||||
| Fuel pump motor wire x No. 3 intake manifold | 10 | 102 | 7 | ||||
| No. 4 water by-pass pipe x Cylinder head | 10 | 102 | 7 | ||||
| Vacuum pump to connector tube | for bolt A | 21 | 214 | 15 | |||
| for bolt B | 10 | 102 | 7 | ||||
| No. 2 engine wire x Cylinder head | 13 | 133 | 10 | ||||
| Vacuum reservoir connect tube x Cylinder head | for bolt A | 21 | 214 | 15 | |||
| for bolt B | 10 | 102 | 7 | ||||
| No. 4 water by-pass pipe x Cylinder head | 10 | 102 | 7 | ||||
| No. 2 engine oil dipstick guide x Cylinder head cover | 10 | 102 | 7 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Turbocharger | 20 | 204 | 15 | ||||
| Inlet compressor elbow x Turbocharger | 21 | 214 | 15 | ||||
| No. 1 turbo oil pipe x Turbocharger | 10 | 102 | 7 | ||||
| Inlet turbo oil pipe sub-assembly x Turbocharger | for union bolt | 24 | 245 | 18 | |||
| for bolt | 10 | 102 | 7 | ||||
| Exhaust manifold RH x Cylinder head RH | 36 | 367 | 27 | ||||
| Turbocharger x Exhaust manifold LH | 69 | 704 | 51 | ||||
| Exhaust manifold LH x Cylinder head LH | 36 | 367 | 27 | ||||
| No. 2 exhaust manifold pipe x Exhaust manifold LH | 21 | 214 | 15 | ||||
| Exhaust crossover pipe sub-assembly x No. 1 stay | Bolt labeled A | 43 | 438 | 32 | |||
| Exhaust crossover pipe sub-assembly x No. 2 stay | Bolt labeled E | 50 | 510 | 37 | |||
| No. 1 stay x Cylinder head RH | Bolt labeled B | 43 | 438 | 32 | |||
| No. 2 stay x Cylinder head LH | Bolt labeled D | 50 | 510 | 37 | |||
| Exhaust crossover pipe sub-assembly x Exhaust manifold LH and RH | Nut labeled C | 69 | 704 | 51 | |||
| No. 1 turbo water pipe sub-assembly x Turbocharger x Cylinder head | 10 | 102 | 7 | ||||
| No. 1 air tube x Turbocharger | 21 | 214 | 15 | ||||
| No. 3 air hose x Hose clamp | 6.3 | 64 | 56 | ||||
| No. 2 air tube x Hose clamp | 6.3 | 64 | 56 | ||||
| No. 2 air tube x Cylinder block | 21 | 214 | 15 | ||||
| No. 1 exhaust manifold heat insulator x Exhaust manifold RH | 25 | 255 | 18 | ||||
| No. 2 exhaust manifold heat insulator x Exhaust manifold LH | 25 | 255 | 18 | ||||
| No. 1 fuel tube bracket x Vehicle body (w/ Air Conditioning System) |
5.4 | 55 | 48 | ||||
| Fuel tube bracket x Vehicle body | 5.4 | 55 | 48 | ||||
| Front exhaust pipe assembly x Outlet turbine elbow | 47 | 479 | 35 | ||||
| Front exhaust pipe assembly x No. 1 exhaust pipe support | 43 | 438 | 32 | ||||
| No. 1 exhaust pipe support x Transmission assembly | 43 | 438 | 32 | ||||
| Front exhaust pipe assembly x No. 2 frame crossmember sub-assembly | 19 | 194 | 14 | ||||
| Front exhaust pipe assembly x Front No. 2 exhaust pipe sub-assembly | 48 | 489 | 35 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Stud bolt x Turbocharger | 20 | 204 | 15 | ||||
| Inlet compressor elbow x Turbocharger | 21 | 214 | 15 | ||||
| No. 1 turbo oil pipe x Turbocharger | 10 | 102 | 7 | ||||
| Inlet turbo oil pipe sub-assembly x Turbocharger | for union bolt | 24 | 245 | 18 | |||
| for bolt | 10 | 102 | 7 | ||||
| Exhaust manifold RH x Cylinder head RH | 36 | 367 | 27 | ||||
| Turbocharger x Exhaust manifold LH | 69 | 704 | 51 | ||||
| Exhaust manifold LH x Cylinder head LH | 36 | 367 | 27 | ||||
| Exhaust crossover pipe sub-assembly x No. 1 stay | Bolt labeled A | 43 | 438 | 32 | |||
| Exhaust crossover pipe sub-assembly x No. 2 stay | Bolt labeled E | 50 | 510 | 37 | |||
| No. 1 stay x Cylinder head RH | Bolt labeled B | 43 | 438 | 32 | |||
| No. 2 stay x Cylinder head LH | Bolt labeled D | 50 | 510 | 37 | |||
| Exhaust crossover pipe sub-assembly x Exhaust manifold LH and RH | Nut labeled C | 47 | 479 | 35 | |||
| No. 1 turbo water pipe sub-assembly x Turbocharger x Cylinder head | 10 | 102 | 7 | ||||
| No. 1 air tube x Turbocharger | 21 | 214 | 15 | ||||
| No. 3 air hose x Hose clamp | 6.3 | 64 | 56 | ||||
| No. 2 air tube x Hose clamp | 6.3 | 64 | 56 | ||||
| No. 2 air tube x Cylinder block | 21 | 214 | 15 | ||||
| No. 1 exhaust manifold heat insulator x Exhaust manifold RH | 25 | 255 | 18 | ||||
| No. 2 exhaust manifold heat insulator x Exhaust manifold LH | 25 | 255 | 18 | ||||
| No. 1 fuel tube bracket x Vehicle body (w/ Air Conditioning System) |
5.4 | 55 | 48 | ||||
| Fuel tube bracket x Vehicle body | 5.4 | 55 | 48 | ||||
| Monolithic converter assembly x Outlet turbine elbow | 47 | 479 | 35 | ||||
| Center converter protector stay x Transmission assembly | 43 | 438 | 32 | ||||
| Front exhaust pipe assembly x Monolithic converter assembly | 43 | 438 | 32 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Intercooler protector x Intercooler assembly | 8.0 | 82 | 71 | ||||
| Intercooler support bracket x Intercooler assembly | 21 | 214 | 15 | ||||
| No. 1 cool inlet x Intercooler assembly | 21 | 214 | 15 | ||||
| No. 2 cool inlet x Intercooler assembly | 21 | 214 | 15 | ||||
| No. 1 air hose x Intercooler assembly | 6.3 | 64 | 56 | ||||
| Outlet heater water pipe B x Intercooler assembly | 21 | 214 | 15 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Upper catalytic converter insulator x Monolithic converter assembly (w/o DPF) | 21 | 214 | 15 | ||||
| Monolithic converter assembly x Outlet turbine elbow (w/o DPF) | 47 | 479 | 35 | ||||
| Center converter protector stay x Transmission assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Center converter protector stay x Monolithic converter assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Exhaust pipe support cushion x Front exhaust pipe assembly (w/o DPF) | 5.5 | 56 | 49 | ||||
| Exhaust pipe support cushion x Vehicle body | 5.5 | 56 | 49 | ||||
| Front exhaust pipe assembly x Monolithic converter assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Exhaust pipe support cushion x Tailpipe assembly | 5.5 | 56 | 49 | ||||
| Tailpipe assembly x Front exhaust pipe assembly (w/o DPF) | 48 | 489 | 35 | ||||
| Front exhaust pipe assembly x Outlet turbine elbow (w/ DPF) | 47 | 479 | 35 | ||||
| Front exhaust pipe assembly x No. 1 exhaust pipe support (w/ DPF) | 43 | 438 | 32 | ||||
| No. 1 exhaust pipe support x Transmission assembly (w/ DPF) | 43 | 438 | 32 | ||||
| Front exhaust pipe assembly x No. 2 frame crossmember sub-assembly (w/ DPF) | 19 | 194 | 14 | ||||
| Front exhaust pipe assembly x Front No. 2 exhaust pipe sub-assembly (w/ DPF) | 43 | 438 | 32 | ||||
| Exhaust pipe support cushion x Front No. 2 exhaust pipe sub-assembly (w/ DPF) | 5.5 | 56 | 49 | ||||
| Tailpipe assembly x Front No. 2 exhaust pipe sub-assembly (w/ DPF) | 48 | 489 | 35 | ||||
| Part Tightened | N*m | kgf*cm | ft.*lbf | in.*lbf | |||
|---|---|---|---|---|---|---|---|
| Upper catalytic converter insulator x Monolithic converter assembly (w/o DPF) | 21 | 214 | 15 | ||||
| Monolithic converter assembly x Outlet turbine elbow (w/o DPF) | 47 | 479 | 35 | ||||
| Center converter protector stay x Transmission assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Center converter protector stay x Monolithic converter assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Exhaust pipe support cushion x Front exhaust pipe assembly (for Double Cab w/o DPF) |
5.5 | 56 | 49 | ||||
| Exhaust pipe support cushion x Vehicle body | 5.5 | 56 | 49 | ||||
| Front exhaust pipe assembly x Monolithic converter assembly (w/o DPF) | 43 | 438 | 32 | ||||
| Exhaust pipe support cushion x Support bracket | 5.5 | 56 | 49 | ||||
| Exhaust pipe support cushion x Muffler clamp bracket | 5.5 | 56 | 49 | ||||
| Exhaust pipe support cushion x Center exhaust pipe assembly (except Double Cab w/o DPF) |
5.5 | 56 | 49 | ||||
| Center exhaust pipe assembly x Front exhaust pipe assembly (w/o DPF) | 48 | 489 | 35 | ||||
| Front exhaust pipe assembly x Outlet turbine elbow (w/ DPF) | 47 | 479 | 35 | ||||
| Front exhaust pipe assembly x No. 1 exhaust pipe support (w/ DPF) | 43 | 438 | 32 | ||||
| No. 1 exhaust pipe support x Transmission assembly (w/ DPF) | 43 | 438 | 32 | ||||
| Front exhaust pipe assembly x No. 2 frame crossmember sub-assembly (w/ DPF) | 19 | 194 | 14 | ||||
| Front No. 2 exhaust pipe sub-assembly x Exhaust pipe damper (Model coad #J78 series w/ DPF) | 19 | 194 | 14 | ||||
| Exhaust pipe support cushion x Front No. 2 exhaust pipe sub-assembly (Model coad #J79 series w/ DPF) | 5.5 | 56 | 49 | ||||
| Front exhaust pipe assembly x Front No. 2 exhaust pipe sub-assembly (w/ DPF) | 43 | 438 | 32 | ||||
| Center exhaust pipe assembly x Front No. 2 exhaust pipe sub-assembly (w/ DPF) | 48 | 489 | 35 | ||||
| Exhaust pipe support cushion x Tailpipe assembly | 5.5 | 56 | 49 | ||||
| Tailpipe assembly x Center exhaust pipe assembly | 48 | 489 | 35 | ||||