89871A 1.INSTALL INJECTOR DRIVER
w/ DPF:
| *1 | No. 2 Injector Driver |
| *2 | Injector Driver Bracket |
Install the No. 2 injector driver to the injector driver bracket with the 4 screws.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Install the No. 1 injector driver to the injector driver bracket with the 4 screws.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Connect the No. 1 injector driver and No. 2 injector driver with the 2 bolts.
| *a | Bolt A |
| *b | Bolt B |
| *c | Bolt C |
Temporarily install the injector driver with the bolt labeled A.
Install the bolt labeled B.
Install the bolt labeled C.
Tighten the bolt labeled A.
Attach the clamps.
Connect the connectors and lower the levers.
When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and connector.
Make sure that the levers are securely lowered.
Connect the connectors and attach the clamp.
w/o DPF:
| *1 | No. 2 Injector Driver |
| *2 | Injector Driver Bracket |
Install the No. 2 injector driver to the injector driver bracket with the 4 screws.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Install the No. 1 injector driver to the injector driver bracket with the 4 screws.
| *1 | No. 1 Injector Driver |
| *2 | Injector Driver Bracket |
Connect the No. 1 injector driver and No. 2 injector driver with the 2 bolts.
| *a | Bolt A |
| *b | Bolt B |
| *c | Bolt C |
Temporarily install the injector driver with the bolt labeled A.
Install the bolt labeled B.
Install the bolt labeled C.
Tighten the bolt labeled A.
Attach the clamps.
Connect the connectors and lower the levers.
When connecting a connector, make sure that dirt, water and other foreign matter is not stuck between the connector and connector.
Make sure that the levers are securely lowered.
Connect the connectors and attach the clamp.