Home › Vehicle Interior › HEATING / AIR CONDITIONING › CONDENSER (for 1VD-FTV LHD) › from 2017.01
RM25T0E _58 Vehicle Interior _029469 HEATING / AIR CONDITIONING _0308013 CONDENSER(for 1VD-FTV LHD) A

HEATING / AIR CONDITIONING  CONDENSER(for 1VD-FTV LHD)  DISASSEMBLY  


PROCEDURE

Hide 88474 1.REMOVE COOLER DRYER

a.
I030086

Using a 14 mm socket hexagon wrench, remove the cap from the modulator.


b.
I032475

Remove the O-ring from the cap.


c.
E050386

Using pliers, remove the cooler dryer.


Hide 88716A 2.REMOVE COOLER REFRIGERANT LIQUID PIPE A

E147529

a.

Remove the bolt and cooler refrigerant liquid pipe A from the cooler condenser assembly.

NOTICE:
·

When removing the bolt, do not allow any tools to contact the pipe.

·

When removing the bolt, hold a part of the pipe near the connector.




b.

Remove the O-ring from the cooler refrigerant liquid pipe A.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent moisture and foreign matter from entering them.



Hide 88467B 3.REMOVE UPPER COOLER BRACKET LH

E147522

a.

Remove the bolt and upper cooler bracket LH.


Hide 88467B 4.REMOVE UPPER COOLER BRACKET RH

E192981

a.

Remove the bolt and upper cooler bracket RH.


Hide 88467B 5.REMOVE LOWER COOLER BRACKET LH

E303645

a.

Remove the bolt and lower cooler bracket LH.


Hide 88467B 6.REMOVE LOWER COOLER BRACKET RH

E303846

a.

Remove the bolt and lower cooler bracket RH.


Hide 88467 7.REMOVE PIPING BRACKET LH

E147525

a.

Remove the 2 bolts and piping bracket LH.


Hide 88467 8.REMOVE PIPING BRACKET RH

E147526

a.

Remove the 2 bolts and piping bracket LH.