Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE MASTER CYLINDER (w/ VSC) › from 2017.01
RM25T0E _54 Brake _029916 BRAKE SYSTEM (OTHER) _0282726 BRAKE MASTER CYLINDER(w/ VSC) A

BRAKE SYSTEM (OTHER)  BRAKE MASTER CYLINDER(w/ VSC)  REASSEMBLY  


PROCEDURE

Hide 04493 1.INSTALL BRAKE MASTER CYLINDER KIT

a.
C267671C01
0.823,0.99 0.854,1.135 false
V100135

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to the rubber parts as shown in the illustration.


b.

Install the No. 2 piston to the master cylinder body.

NOTICE:

Insert the piston straight so that the inside of the cylinder is not damaged.



c.
C267672

With the piston pushed in, insert the straight pin into the port of the reservoir installation area.

NOTICE:

Make sure that the straight pin and piston are securely installed.



d.
C267669

With the piston pushed in, install a new snap ring using snap ring pliers.


Hide 47299 2.INSTALL BRAKE MASTER CYLINDER RESERVOIR STRAINER

a.

Install the brake master cylinder reservoir strainer to the brake master cylinder reservoir assembly.


Hide 47230 3.INSTALL BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY

a.

Install the brake master cylinder reservoir filler cap assembly to the brake master cylinder reservoir assembly.


Hide 47287 4.INSTALL BRAKE FLUID INFORMATION LABEL

Hide 47255 5.INSTALL MASTER CYLINDER RESERVOIR GROMMET

a.
C313852C01
1.219,1.458 1.5,1.458 false
V100155

Lithium soap base glycol grease


Apply a light coat of lithium soap base glycol grease to 2 new master cylinder reservoir grommets.


b.

Install the 2 master cylinder reservoir grommets to the brake master cylinder reservoir assembly.


Hide 47202 6.INSTALL BRAKE MASTER CYLINDER RESERVOIR SUB-ASSEMBLY

a.

Install the brake master cylinder reservoir sub-assembly to the master cylinder body.

C375472C01
0.125,0.083 0.5,0.323 0.375,0.24 12 false *A 4.042,0.083 4.417,0.323 0.375,0.24 12 false *B
*A for LHD *B for RHD



b.

Install the screw.