RM25T0E _V1 General _029810 SPECIFICATIONS _0146332 BRAKE SYSTEM (OTHER) F
SPECIFICATIONS BRAKE SYSTEM (OTHER) SERVICE DATA
Brake Pedal
| Brake pedal height from floor panel |
for LHD |
177.9 to 187.9 mm (7.01 to 7.39 in.) |
| for RHD |
175.9 to 185.9 mm (6.93 to 7.31 in.) |
| Stop light switch clearance |
0.5 and 2.4 mm (0.0197 and 0.0944 in.) |
| Brake pedal free play |
1.0 to 6.0 mm (0.0394 to 0.236 in.) |
| Brake pedal reserve distance from floor panel |
for LHD without ABS |
More than 128 mm (5.03 in.) |
| for LHD without VSC |
More than 136 mm (5.35 in.) |
| for RHD without ABS |
More than 127 mm (4.99 in.) |
| for RHD without VSC |
More than 136 mm (5.35 in.) |
| for LHD with VSC |
More than 128 mm (5.04 in.) |
| for RHD with VSC |
More than 136 mm (5.35 in.) |
Brake Master Cylinder (w/ VSC)
| Brake booster push rod clearance |
-0.1 to 0.11 mm (-0.00394 to 0.00433 in.) |
Brake Master Cylinder (w/o VSC)
| Brake booster push rod clearance |
for 1GR-FE |
-0.21 to 0 (-0.00827 to 0 in.) |
| for 1HZ |
-0.1 to 0.11 mm (-0.00394 to 0.00433 in.) |
| for 1VD-FTV |
Brake Master Cylinder (w/o ABS)
| Brake booster push rod clearance |
for 1GR-FE |
0.14 to 0.35 mm (0.00552 to 0.0137 in.) |
| for 1HZ |
0.25 to 0.5 mm (0.00985 to 0.0196 in.) |
| for 1VD-FTV |
Vacuum Pump (for 1HZ)
| Standard pressure |
More than 87 kPa (650 mmHg, 25.6 in.Hg) |
Vacuum Pump (for 1VD-FTV)
| Standard pressure |
More than 87 kPa (650 mmHg, 25.6 in.Hg) |
Brake Fluid
| SAE J1703 or FMVSS No. 116 DOT 3 |