Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ECD SYSTEM (w/o EGR System) › from 2019.09
RM25T0E _51 Engine / Hybrid System _029760 1VD-FTV ENGINE CONTROL _0309414 ECD SYSTEM(w/o EGR System) C

1VD-FTV ENGINE CONTROL  ECD SYSTEM(w/o EGR System)  P0101  Mass or Volume Air Flow Circuit Range / Performance Problem  


DESCRIPTION

Refer to DTC P0100.

Click hereEngine / Hybrid System>1VD-FTV (ENGINE CONTROL)>ECD SYSTEM (w/o EGR System)>P0100

DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory
P0101 Mass or Volume Air Flow Circuit Range / Performance Problem When one of the following conditions is met:
·

After engine is warmed up, condition (a) continues for more than 10 seconds at idling (2 trip detection logic):

(a)

Mass air flow meter output more than 4.4 V


·

Conditions (a) and (b) continue for more than 10 seconds with engine speed at 1250 rpm or more (2 trip detection logic):

(a)

VTA more than 0.1 V

(b)

Mass air flow meter output less than 0.7 V



Mass air flow meter Comes on DTC stored

CAUTION / NOTICE / HINT

HINT:

Read freeze frame data using the GTS. Freeze frame data records the engine condition when malfunctions are detected. When troubleshooting, freeze frame data can help determine if the vehicle was moving or stationary, if the engine was warmed up or not, and other data from the time the malfunction occurred.


PROCEDURE

1.CHECK OTHER DTC OUTPUT (IN ADDITION TO DTC P0101)
a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON and turn the GTS on.


c.

Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.

Powertrain > Engine and ECT > Trouble Codes
50001 61

d.

Read DTCs.

Result:
Result Proceed to
P0101 and other DTCs are output A
P0101 is output B


HINT:

If codes other than P0101 are output, perform troubleshooting for those DTCs first.




A

B