Home › Engine / Hybrid System › 1GR-FE (LUBRICATION) › OIL AND OIL FILTER › 2019.09–2021.07
RM25T0E _51 Engine / Hybrid System _029523 1GR-FE LUBRICATION _0133822 OIL AND OIL FILTER A

1GR-FE LUBRICATION  OIL AND OIL FILTER  REPLACEMENT  


CAUTION / NOTICE / HINT

CAUTION:
·

Prolonged and repeated contact with engine oil will result in the loss of natural oils from the skin, leading to dryness, irritation and dermatitis. In addition, used engine oil contains potentially harmful contaminants which may cause skin cancer.

·

Wear protective clothing and gloves. Avoid contact with used oil. If contact occurs, wash the area thoroughly with soap or waterless hand cleaner. Never use gasoline, thinners, or solvents to wash the skin.

·

In order to protect the environment, dispose of used oil and used oil filters at designated disposal sites only.



PROCEDURE

Hide 1.DRAIN ENGINE OIL

a.

Remove the oil filler cap.


b.

Remove the oil pan drain plug and gasket, and then drain the engine oil into a container.


c.

Clean and install the oil pan drain plug together with a new gasket.

Torque:
40 N*m (408 kgf*cm, 30 ft.*lbf)


Hide 15601 2.REMOVE OIL FILTER SUB-ASSEMBLY

a.

Remove the drain pipe cap.


b.

Install a drain hose to the oil filter bracket assembly.

HINT:
·

Put a disposal container beneath the drain hose to collect the oil from the oil filter cover.

·

Drain hose inside diameter: 8 mm (0.315 in.)

·

Drain hose length: 900 mm (2.95 ft.)




c.
A320071C01
1.906,1.833 2.667,1.917 2.667,1.917 2.833,1.917 true 0.833,0.573 1,0.573 1,0.573 2,0.917 true 2.854,1.833 3.167,1.99 0.313,0.156 10 false *a 0.563,0.5 0.896,0.667 0.333,0.167 10 true SST
*a Drain Hose


Using SST, remove the oil filter sub-assembly.

SST
09228-07501  


Hide 15601 3.INSTALL OIL FILTER SUB-ASSEMBLY

a.

Check and clean the oil filter sub-assembly installation surface.


b.

Apply clean engine oil to the gasket of a new oil filter sub-assembly.


c.

Lightly screw the oil filter sub-assembly into place by hand. Tighten it until the gasket contacts the seat.


d.
A330070C01
2.26,1.323 2.75,1.667 2.75,1.667 2.917,1.667 true 1.583,0.25 1.75,0.25 1.75,0.25 1.99,0.448 true 1.417,0.167 1.667,0.333 0.25,0.167 10 false *a 2.917,1.583 3.333,1.75 0.417,0.167 10 true SST
*a 3/4 turn


Using SST, tighten the oil filter sub-assembly. Depending on the space available, choose from the following.

SST
09228-07501  

i.

If enough space is available, use a torque wrench to tighten the oil filter sub-assembly.

Torque:
18 N*m (184 kgf*cm, 13 ft.*lbf)


ii.

If enough space is not available to use a torque wrench, tighten the oil filter sub-assembly 3/4 of a turn by hand or with a common wrench.



e.

Remove the drain hose from the oil filter bracket assembly.


f.

Install the drain pipe cap.


Hide 4.ADD ENGINE OIL

a.

Add new engine oil.

NOTICE:
A308107

Do not allow engine oil to adhere to the moving parts of the belt tensioner, as this may cause malfunctions.

If engine oil is on the location indicated by the arrow, replace the belt tensioner.


Standard Oil Grade:
Oil Grade Oil Viscosity (SAE)
API grade SL "energy-conserving", SM "energy-conserving", SN "resource-conserving", SN PLUS "resource-conserving" or ILSAC multigrade engine oil 5W-30
10W-30
API grade SL, SM, SN or SN PLUS multigrade engine oil 15W-40
20W-50


Standard Oil Capacity:
Item Specified Condition
Drain and refill without oil filter change 5.1 liters (5.4 US qts, 4.5 Imp. qts)
Drain and refill with oil filter change 5.4 liters (5.7 US qts, 4.8 Imp. qts)
Dry fill 6.4 liters (6.7 US qts, 5.6 Imp. qts)



b.

Install the oil filler cap.


Hide 5.INSPECT FOR OIL LEAK

a.

Start the engine. Make sure that there are no oil leaks from the area that was worked on.