Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH › from 2021.07
RM25T0E _58 Vehicle Interior _029924 DOOR LOCK _0137596 DOOR CONTROL SWITCH G

DOOR LOCK  DOOR CONTROL SWITCH  INSPECTION  


PROCEDURE

Hide 84930 1.INSPECT DOOR CONTROL SWITCH ASSEMBLY

a.
B625815C02
1.813,1.063 2.083,0.313 true 1.594,1.219 1.344,1.896 true 1.438,1.063 1.083,0.323 true 1.25,1.208 0.865,1.885 true 2.51,1.948 2.104,1.208 true 0.083,0.094 0.396,0.292 0.313,0.198 10 false *a 2,0.094 2.219,0.292 0.219,0.198 10 false UL 1.313,1.969 1.625,2.167 0.313,0.198 10 false L 0.729,1.927 1.052,2.125 0.323,0.198 10 false ILL+ 1.052,0.125 1.208,0.323 0.156,0.198 10 false E 2.49,1.979 2.813,2.177 0.323,0.198 10 false ILL-
*a Component without harness connected


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Switch Condition Specified Condition
5 (L) - 6 (E) Lock Below 1 Ω
5 (L) - 6 (E)
4 (UL) - 6 (E)
FREE 10 kΩ or higher
4 (UL) - 6 (E) Unlock Below 1 Ω


If the result is not as specified, replace the door control switch assembly.


b.

Apply battery voltage between the terminals of the door control switch assembly, and check the illumination of the door control switch assembly.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 7 (ILL+)
Battery negative (-) → Terminal 2 (ILL-)
Illuminates


If the result is not as specified, replace the door control switch assembly.