Wear protective gloves. Sharp areas on the parts may injure your hands.
If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the front inner seat track assembly RH or front outer seat track assembly RH due to the difference in shape between the left and right seat tracks.
Use the same procedure for RHD and LHD vehicles.
The procedure listed below is for LHD vehicles.
Use the same procedure for the RH and LH sides.
The procedure listed below is for the RH side.
71910A 1.REMOVE FRONT SEAT HEADREST ASSEMBLY
Remove the front seat headrest assembly.
72137 2.REMOVE OUTER SEAT TRACK COVER RH (for Walk in Seat Type)
Operate the seat track adjusting handle to move the seat to the foremost position.
Remove the clip.
Detach the 2 guides and remove the outer seat track cover RH.
72157A 3.REMOVE INNER SEAT TRACK COVER BRACKET RH (for Walk in Seat Type)
Use the same procedure described for the outer seat track cover RH.
72137 4.REMOVE OUTER SEAT TRACK COVER RH (except Walk in Seat Type, w/ Seat Track Cover)
Operate the seat track adjusting handle to move the seat to the foremost position.
Detach the 2 claws and guide and remove the outer seat track cover RH.
72158 5.REMOVE INNER SEAT TRACK COVER BRACKET RH (except Walk in Seat Type, w/ Seat Track Cover)
Use the same procedure described for the outer seat track cover RH.
6.REMOVE FRONT SEAT ASSEMBLY
Remove the 2 bolts.
Operate the seat track adjusting handle to move the seat to the rearmost position.
Remove the 2 bolts.
Operate the seat track adjusting handle to move the seat to the center position and operate the reclining adjusting handle to move the seatback to the upright position.
w/ Occupant Detection Sensor:
Disconnect the connector and detach the clamp.
Remove the front seat assembly from the vehicle.
Be careful not to damage the vehicle body.