Home › Vehicle Interior › SEAT › FRONT SEAT ASSEMBLY (for Separate Seat Type without Inner Belt Attached) › from 2021.07
RM25T0E _58 Vehicle Interior _029930 SEAT _0289747 FRONT SEAT ASSEMBLY(for Separate Seat Type without Inner Belt Attached) A

SEAT  FRONT SEAT ASSEMBLY(for Separate Seat Type without Inner Belt Attached)  DISASSEMBLY  


CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.


NOTICE:

If the seat is set down in another location after removing it from the vehicle, the seat may tilt and damage the front inner seat track assembly RH or front outer seat track assembly RH due to the difference in shape between the left and right seat tracks.


HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.

·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the RH side.



PROCEDURE

Hide 71811C 1.REMOVE RECLINING ADJUSTER COVER RH

a.
B375303

Remove the 2 screws and reclining adjuster cover RH.


Hide 2.REMOVE FRONT SEATBACK ASSEMBLY

a.
B383128

Remove the bolt.


b.
B383130C03
2.635,1.854 1.969,1.25 true 0.729,1.823 1.552,1.427 true 2.677,1.896 2.99,2.094 0.313,0.198 10 false *a 0.531,1.781 0.844,1.979 0.313,0.198 10 false *b
*a Stake Part
*b Protective Tape


Using a screwdriver, unstake the stake part of the outer reclining seat adjuster assembly RH and disconnect the reclining remote control cable.

HINT:

Tape the screwdriver tip before use.



c.

for Walk in Seat Type, for Short Body:

i.
B375315

Remove the tension spring.


ii.
B375318

Remove the clamp and disconnect the 2 cables from the separate type front seat cushion spring assembly.


iii.
B375319C03
1.063,0.927 0.469,0.479 true 1.292,0.938 1.198,0.302 true 0.292,0.313 0.771,0.75 0.479,0.438 10 false *a 1.104,0.104 1.417,0.302 0.313,0.198 10 false *b
*a Stake Part
*b Protective Tape


Loosen the nut and disconnect the seat track control cable assembly.


iv.

Using a screwdriver, unstake the stake part of the front outer seat track assembly RH.

HINT:

Tape the screwdriver tip before use.




d.

for Walk in Seat Type, for Long Body:

i.

Remove the tension spring.


ii.

Remove the clamp and disconnect the 2 cables from the separate type front seat cushion spring assembly.


iii.

Loosen the nut and disconnect the seat track control cable assembly.


iv.

Using a screwdriver, unstake the stake part of the front inner seat track assembly RH.

HINT:

Tape the screwdriver tip before use.




e.
B382588C03
0.927,0.896 1.729,0.604 false 0.74,0.813 1.052,1.01 0.313,0.198 10 false *a
*a Protective Tape


Using a screwdriver, remove the E-ring.

HINT:

Tape the screwdriver tip before use.



f.
B375309

Remove the 2 bolts and front seatback assembly.


g.

Remove the center seat hinge spacer and washer from the front seatback assembly.


h.

Remove the washer from the separate type front seat cushion spring assembly.


Hide 74841B 3.REMOVE FRONT SEATBACK PANEL (w/ Front Seatback Panel)

a.
B376421

Remove the 4 screws and front seatback panel.


Hide 71073S 4.REMOVE SEPARATE TYPE FRONT SEATBACK COVER

a.
B375310

w/o Seatback Panel:

Remove the 3 hog rings.


b.
B386184

w/ Seatback Panel:

Remove the 3 hog rings.


c.
B375311

Detach the 2 hooks and disconnect the straps of the separate type front seatback cover.


d.
B375312

Detach the 4 claws and remove the 2 front seat headrest support assemblies.


e.
B375313

Remove the 3 hog rings and separate type front seatback cover from the separate type front seatback pad.


Hide 71551S 5.REMOVE SEPARATE TYPE FRONT SEATBACK PAD

a.

Remove the separate type front seatback pad from front seatback frame sub-assembly RH.


Hide 72510D 6.REMOVE OUTER RECLINING SEAT ADJUSTER ASSEMBLY RH

a.
B375314

Remove the 2 bolts and outer reclining seat adjuster assembly RH from the front seatback frame sub-assembly RH.


Hide 71521A 7.REMOVE FRONT SEAT CUSHION SILENCER PAD (for Walk in Seat Type)

a.
B375316

Remove the 2 hog rings and front seat cushion silencer pad.


Hide 72110A 8.REMOVE FRONT OUTER SEAT TRACK ASSEMBLY RH

a.

w/ Seat track adjusting handle:

i.

Operate the seat track adjusting handle to move the front outer seat track assembly RH to the rearmost position.


ii.
B375320

Remove the bolt.


iii.

Operate the seat track adjusting handle to move the front outer seat track assembly RH to the foremost position.


iv.
B375321

Remove the bolt and front outer seat track assembly RH.



b.

w/o Seat track adjusting handle:

i.

Move the front outer seat track assembly RH to the rearmost position.


ii.
B386181

Remove the bolt.


iii.

Move the front outer seat track assembly RH to the foremost position.


iv.
B386182

Remove the bolt and front outer seat track assembly RH.



Hide 72130A 9.REMOVE FRONT INNER SEAT TRACK ASSEMBLY RH

HINT:

Use the same procedure described for the front outer seat track assembly RH.


Hide 71071S 10.REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER

a.
B617489C01
0,0 0,0 false

w/ Occupant Detection Sensor:

i.

Detach the clamp and remove the wire harness from the separate type front seat cushion spring assembly.



b.
B375324

Remove the 11 hog rings.


c.
B375325

Remove the 9 hog rings and separate type front seat cushion cover from the separate type front seat cushion pad.


Hide 71511S 11.REMOVE SEPARATE TYPE FRONT SEAT CUSHION PAD

a.

Remove the separate type front seat cushion pad from the separate type front seat cushion spring assembly.


Hide 72053C 12.REMOVE RECLINING REMOTE CONTROL LEVER SUB-ASSEMBLY RH

a.
B374293

Remove the 2 bolts and reclining remote control lever sub-assembly RH from the separate type front seat cushion spring assembly.


Hide 71148 13.REMOVE FRONT SEAT CUSHION SILENCER

a.
B381152

Remove the 2 front seat cushion silencers from the separate type front seat cushion spring assembly.