Home › Vehicle Interior › SEAT BELT › OCCUPANT DETECTION SENSOR (for Separate Seat Type without Inner Belt Attached) › from 2021.07
RM25T0E _58 Vehicle Interior _029931 SEAT BELT _0478954 OCCUPANT DETECTION SENSOR(for Separate Seat Type without Inner Belt Attached) G

SEAT BELT  OCCUPANT DETECTION SENSOR(for Separate Seat Type without Inner Belt Attached)  INSPECTION  


PROCEDURE

Hide 71512S 1.INSPECT SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)

a.
B617500C01
1.917,1.281 2.167,1.781 true 1.281,1.781 1.531,1.281 true 0.156,0.135 0.469,0.292 0.313,0.156 10 false *a 2.135,1.781 2.292,1.979 0.156,0.198 10 false + 1.125,1.771 1.521,2.021 0.396,0.25 10 false WS-
*a Component without harness connected
(Separate Type Front Seat Cushion Pad (Occupant Detection Sensor))


Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
1(+) - 2(WS-) Front passenger seat occupied Below 100 Ω
Front passenger seat not occupied 1 MΩ or higher


If the result is not as specified, replace the separate type front seat cushion pad (occupant detection sensor).