Home › Vehicle Interior › SUPPLEMENTAL RESTRAINT SYSTEMS › CENTER AIRBAG SENSOR ASSEMBLY › from 2022.09
RM25T0E _58 Vehicle Interior _029929 SUPPLEMENTAL RESTRAINT SYSTEMS _0138001 CENTER AIRBAG SENSOR ASSEMBLY A

SUPPLEMENTAL RESTRAINT SYSTEMS  CENTER AIRBAG SENSOR ASSEMBLY  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 89179A 4.REMOVE AIRBAG SENSOR COVER

a.
B461286

Remove the 3 bolts and airbag sensor cover.


Hide 89175 5.REMOVE AIRBAG SENSOR BRACKET

NOTICE:
·

When disconnecting any airbag connector, take care not to damage the airbag wire harness.

·

Do not remove the waterproof sheet.

·

If the center airbag sensor assembly has been dropped, replace it with a new one.



a.
B374348C03
2.26,1.188 2.677,0.771 true 2.156,2.333 2.552,2.333 true 2.094,1.115 2.406,1.271 0.313,0.156 10 false *a 2.594,2.229 2.802,2.438 0.208,0.208 10 true *b
*a Connector Lock Lever
*b Waterproof Sheet


Disconnect the airbag connector.

i.

Push and pull the connector lock lever to release the connector lock as shown in the illustration.


ii.

Disconnect the airbag connector.



b.

Remove the 3 bolts and airbag sensor bracket together with the center airbag sensor assembly.


Hide 89170 6.REMOVE CENTER AIRBAG SENSOR ASSEMBLY

a.
E298622

Remove the 3 bolts and center airbag sensor assembly from the airbag sensor bracket.

NOTICE:
·

Do not remove the waterproof sheet.

·

If the center airbag sensor assembly has been dropped, replace it with a new one.