Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81735 1.REMOVE SIDE TURN SIGNAL LIGHT SOCKET (for Small Type)
| *1 | Matchmark |
| *2 | Unlock Position Mark |
Turn the side turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the side turn signal light socket from the side turn signal light lens LH.
81730A 2.INSTALL SIDE TURN SIGNAL LIGHT SOCKET PLUG (for Large Type)
| *1 | Matchmark |
| *2 | Unlock Position Mark |
Turn the side turn signal light socket plug counterclockwise until the matchmark is aligned with the unlock position mark to remove the side turn signal light socket plug from the side turn signal light lens LH.
81730B 3.REMOVE SIDE TURN SIGNAL LIGHT BULB (for Small Type)
Remove the side turn signal light bulb from the side turn signal light socket.
81730B 4.REMOVE SIDE TURN SIGNAL LIGHT BULB (for Large Type)
|
Push |
|
Counterclockwise |
Push the side turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.
81742 5.REMOVE SIDE TURN SIGNAL LIGHT LENS GASKET LH (for Small Type)
Remove the side turn signal light lens gasket LH from the side turn signal light socket.
81279 6.REMOVE SIDE TURN SIGNAL LIGHT WASHER (for Large Type)
Remove the side turn signal light washer from the screw.
Use the same procedure for the other side.