Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
81279 1.INSTALL SIDE TURN SIGNAL LIGHT WASHER (for Large Type)
Install the side turn signal light washer to the screw.
81742 2.INSTALL SIDE TURN SIGNAL LIGHT LENS GASKET LH (for Small Type)
Install a new side turn signal light lens gasket LH to the side turn signal light socket.
81730B 3.INSTALL SIDE TURN SIGNAL LIGHT BULB (for Small Type)
Install the side turn signal light bulb to the side turn signal light socket.
81730B 4.INSTALL SIDE TURN SIGNAL LIGHT BULB (for Large Type)
|
Push |
|
Clockwise |
While pushing the side turn signal light bulb, turn the bulb clockwise to install the bulb.
81735 5.INSTALL SIDE TURN SIGNAL LIGHT SOCKET (for Small Type)
| *1 | Matchmark |
| *2 | Unlock Position Mark |
| *3 | Lock Position Mark |
Align the matchmark of the side turn signal light socket to the unlock position mark, and then rotate the side turn signal light socket clockwise until the lock position mark to install the side turn signal light socket to the side turn signal light lens LH.
81730A 6.INSTALL SIDE TURN SIGNAL LIGHT SOCKET PLUG (for Large Type)
| *1 | Matchmark |
| *2 | Unlock Position Mark |
| *3 | Lock Position Mark |
Align the matchmark of the side turn signal light socket plug to the unlock position mark, and then rotate the side turn signal light socket plug clockwise until the lock position mark to install the side turn signal light socket plug to the side turn signal light lens LH.