Home › Vehicle Exterior › LIGHTING (EXT) › SIDE TURN SIGNAL LIGHT BULB › from 2022.09
RM25T0E _59 Vehicle Exterior _029940 LIGHTING (EXT) _0138195 SIDE TURN SIGNAL LIGHT BULB A

LIGHTING (EXT)  SIDE TURN SIGNAL LIGHT BULB  REPLACEMENT  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 81740 1.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Small Type)

a.
E296819C01
0,0 0,0 false
V100135

Slide
V100136

Place hand here.


Place your hand at the location indicated by the white arrow shown in the illustration and slide the side turn signal light assembly LH toward the front of the vehicle.


b.

Raise the side turn signal light assembly LH to detach the claw and disconnect it.


Hide 2.REMOVE SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Large Type)

a.
E498477C01
0,0 0,0 false
V100135

Screw
V100155

Protective Tape


Apply protective tape as shown in the illustration.


b.

Remove the 2 screws.


c.

Detach the 2 guides and remove the side turn signal light assembly LH.


Hide 81735 3.REMOVE SIDE TURN SIGNAL LIGHT SOCKET (for Small Type)

a.
E296821C01
1.802,1.146 2.292,0.198 2.292,0.198 2.719,0.198 true 1.552,1.677 1.771,2.01 1.771,2.01 2.052,2.01 true 2.802,0.083 3.115,0.24 0.313,0.156 10 false *1 2.115,1.917 2.427,2.073 0.313,0.156 10 false *2
*1 Matchmark
*2 Unlock Position Mark


Turn the side turn signal light socket counterclockwise until the matchmark is aligned with the unlock position mark to remove the side turn signal light lens LH from the side turn signal light socket.


Hide 81730A 4.REMOVE SIDE TURN SIGNAL LIGHT SOCKET PLUG (for Large Type)

a.
E498479C01
1.667,0.802 1.969,0.125 1.969,0.125 2.104,0.125 false 0.51,2.031 0.698,2.031 0.698,2.031 1.323,0.865 false 2.167,0.021 2.365,0.219 0.198,0.198 10 false *1 0.333,1.948 0.521,2.146 0.188,0.198 10 false *2
*1 Matchmark
*2 Unlock Position Mark


Turn the side turn signal light socket plug counterclockwise until the matchmark is aligned with the unlock position mark to remove the side turn signal light lens LH from the side turn signal light socket plug.


Hide 81730B 5.REMOVE SIDE TURN SIGNAL LIGHT BULB (for Small Type)

a.
E296823

Remove the side turn signal light bulb from the side turn signal light socket.


Hide 81730B 6.REMOVE SIDE TURN SIGNAL LIGHT BULB (for Large Type)

a.
E498481C01
0,0 0,0 false
V100135

Push
V100136

Counterclockwise


Push the side turn signal light bulb in the direction indicated by the black arrow shown in the illustration, turn the bulb counterclockwise, and then remove the bulb from the bulb socket.


Hide 81730B 7.INSTALL SIDE TURN SIGNAL LIGHT BULB (for Small Type)

a.

Install the side turn signal light bulb to the side turn signal light socket.


Hide 81730B 8.INSTALL SIDE TURN SIGNAL LIGHT BULB (for Large Type)

a.
E498482C01
0,0 0,0 false
V100135

Push
V100136

Clockwise


While pushing the side turn signal light bulb, turn the bulb clockwise to install the bulb.


Hide 81735 9.INSTALL SIDE TURN SIGNAL LIGHT SOCKET (for Small Type)

a.
E296822C01
2.313,1.333 2.063,1.333 2.063,1.333 1.688,0.802 true 0.917,1.542 1.438,1.542 1.438,1.542 1.552,1.063 true 0.563,2.802 1.573,2.802 true 2.385,1.229 2.698,1.385 0.313,0.156 10 false *1 0.729,1.438 1.042,1.594 0.313,0.156 10 false *2 0.396,2.698 0.708,2.854 0.313,0.156 10 false *3
*1 Matchmark
*2 Unlock Position Mark
*3 Lock Position Mark


Align the matchmark of the side turn signal light socket to the unlock position mark, and then rotate the side turn signal light socket clockwise until the lock position mark to install the side turn signal light lens LH to the side turn signal light socket.


Hide 81730A 10.INSTALL SIDE TURN SIGNAL LIGHT SOCKET PLUG (for Large Type)

a.
E498483C01
1.531,0.708 2,0.146 2,0.146 2.188,0.146 true 0.469,0.646 1.438,0.646 true 1.698,2.365 2.063,1.938 2.063,1.938 2.229,1.938 true 2.219,0.052 2.531,0.25 0.313,0.198 10 false *1 0.313,0.573 0.625,0.771 0.313,0.198 10 false *2 2.26,1.865 2.573,2.063 0.313,0.198 10 false *3
*1 Matchmark
*2 Unlock Position Mark
*3 Lock Position Mark


Align the matchmark of the side turn signal light socket plug to the unlock position mark, and then rotate the side turn signal light socket plug clockwise until the lock position mark to install the side turn signal light lens LH to the side turn signal light socket plug.


Hide 81740 11.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Small Type)

a.

Attach the claw to connect the side turn signal light assembly LH.


Hide 12.INSTALL SIDE TURN SIGNAL LIGHT ASSEMBLY LH (for Large Type)

a.

Attach the 2 guides.


b.

Install the side turn signal light assembly LH with the 2 screws.