1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
87249B 3.DISCONNECT OUTLET HEATER WATER PIPE B
Remove the 2 bolts and disconnect the outlet heater water pipe B from the intercooler assembly.
17341F 4.REMOVE NO. 1 AIR HOSE
Loosen the 2 clamps and remove the No. 1 air hose.
17940D 5.REMOVE INTERCOOLER ASSEMBLY
Disconnect the turbo pressure sensor connector.
Disconnect the vacuum hose.
Disconnect the intake air temperature sensor connector.
Remove the 4 nuts and disconnect the No. 1 and No. 2 cool air inlets from the intercooler assembly.
Remove the 2 bolts, 2 nuts, intercooler assembly and 2 gaskets.
Remove the 4 bolts and intercooler protector from the intercooler assembly.