Home › Engine / Hybrid System › 1HZ (STARTING) › STARTER (for 2.5 kW, 4.5 kW Type) › from 2022.09
RM25T0E _51 Engine / Hybrid System _029899 1HZ STARTING _0136996 STARTER(for 2.5 kW, 4.5 kW Type) A

1HZ STARTING  STARTER(for 2.5 kW, 4.5 kW Type)  INSTALLATION  


PROCEDURE

Hide 28100 1.INSTALL STARTER ASSEMBLY

a.

Install the starter assembly and ground cable with the bolt and nut.

Torque:
68 N*m (693 kgf*cm, 50 ft.*lbf)


b.

Connect the starter connector.


c.

Connect the starter wire with the nut.

Torque:
21 N*m (214 kgf*cm, 15 ft.*lbf)


d.

Close the terminal cap.


Hide 2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 3. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART