Home › Vehicle Interior › PRE-COLLISION › FRONT CAMERA SYSTEM › from 2022.09
RM25T0E _58 Vehicle Interior _128087 PRE-COLLISION _0564254 FRONT CAMERA SYSTEM U

PRE-COLLISION  FRONT CAMERA SYSTEM  TERMINALS OF ECU  


CHECK FORWARD RECOGNITION CAMERA


NOTICE:
·

DTCs may be output when connectors are disconnected during inspection. Therefore, be sure to clear the DTCs using the GTS once the inspection has been completed.

·

Do not apply excessive force to the forward recognition camera connector.



C494247C01
2.063,0.573 2.458,0.833 0.396,0.26 2.073,0.99 2.469,1.25 0.396,0.26 2.188,1.042 2.646,1.24 0.458,0.198 10 false Y8 2.135,0.615 2.594,0.813 0.458,0.198 10 false S34 1.813,0.625 2.271,0.823 0.458,0.198 10 false *A 1.823,1.031 2.281,1.229 0.458,0.198 10 false *B
*A for Pickup *B except Pickup


a.

Measure the voltage and resistance according to the value(s) in the table below.

for Pickup
Terminal No. (Symbol) Terminal Description Condition Specified Condition
S34-1 (HTR) - S34-10 (GND) Power source Ignition switch ON, forward recognition with heater hood sub-assembly not operating 11 to 14 V
Ignition switch ON, forward recognition with heater hood sub-assembly operating Below 1 V
S34-7 (IGB) - S34-10 (GND) Power source Ignition switch ON 11 to 14 V
ignition switch off Below 1 V
S34-10 (GND) - Body ground Ground Always Below 1 Ω

except Pickup
Terminal No. (Symbol) Terminal Description Condition Specified Condition
Y8-1 (HTR) - Y8-10 (GND) Power source Ignition switch ON, forward recognition with heater hood sub-assembly not operating 11 to 14 V
Ignition switch ON, forward recognition with heater hood sub-assembly operating Below 1 V
Y8-7 (IGB) - Y8-10 (GND) Power source Ignition switch ON 11 to 14 V
ignition switch off Below 1 V
Y8-10 (GND) - Body ground Ground Always Below 1 Ω