Home › Vehicle Interior › PRE-COLLISION › CAMERA HEATER › from 2022.09
RM25T0E _58 Vehicle Interior _128087 PRE-COLLISION _0564252 CAMERA HEATER A

PRE-COLLISION  CAMERA HEATER  REMOVAL  


PROCEDURE

Hide 8646C 1.REMOVE FORWARD RECOGNITION CAMERA

Hide 86401 2.REMOVE FORWARD RECOGNITION WITH HEATER HOOD SUB-ASSEMBLY

NOTICE:
B650250C01
0,0 0,0 false
V100155

Inner Surface of Forward Recognition with Heater Hood Sub-assembly


·

Do not touch the inner surface of the forward recognition with heater hood sub-assembly.

·

Do not apply force to the heating element of the forward recognition with heater hood sub-assembly or an open circuit may result.



a.
B650251

Disconnect the connector.

NOTICE:

When disconnecting the connector, do not forcibly pull the wire harness.



b.
B650252C01
1.375,0.635 1.25,0.865 true 1.51,1.813 0.708,1.865 0.708,1.865 1.292,1.594 true 2.031,1.927 1.719,1.646 true 1.396,0.51 1.625,0.698 0.229,0.188 10 true *a 0.521,1.792 0.719,1.99 0.198,0.198 10 true *b 1.219,1.344 1.365,1.51 0.146,0.167 10 true 1 1.594,1.885 1.74,2.052 0.146,0.167 10 true 2 2.073,1.854 2.271,2.052 0.198,0.198 10 true *b 1.75,1.458 1.896,1.625 0.146,0.167 10 true 3
*a Connector Clamp
*b Guide


Detach the connector clamp.


c.

Remove the wire harness from the guide in the order shown in the illustration.

NOTICE:

Do not pull the harness forcibly when removing the wire harness.



d.
B650253C01
0,0 0,0 false
V113147

Remove in this Direction (1)
V113148

Remove in this Direction (2)
V100135

Push
V100155

Heater Area


Push the claw and pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (1) in the illustration to detach the claw.

NOTICE:

Do not press the heater area.



e.

Pull the forward recognition with heater hood sub-assembly in the direction indicated by the arrow (2) as shown in the illustration to detach the guide and remove the forward recognition with heater hood sub-assembly.