Home › Power Source / Network › 1GR-FE (BATTERY / CHARGING) › GENERATOR › from 2022.09
RM25T0E _57 Power Source / Network _029236 1GR-FE BATTERY / CHARGING _0133251 GENERATOR A

1GR-FE BATTERY / CHARGING  GENERATOR  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

NOTICE:

After turning the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

Hide 16361A 3.REMOVE FAN AND GENERATOR V BELT

Hide 12216C 4.REMOVE OIL BAFFLE PLATE

a.
A219008

Remove the bolt and oil baffle plate.


Hide 27020 5.REMOVE GENERATOR ASSEMBLY

a.

Disconnect the wire harness.

i.
A218967

Disconnect the connector from the generator assembly.


ii.

Remove the terminal cap and nut.


iii.

Disconnect the wire from terminal B.


iv.
A218969

Detach the clamp.


v.

Remove the 2 bolts and detach the 2 wire harness clamp brackets from the generator assembly.



b.
A218968

Remove the 2 bolts and generator assembly.