1. PRECAUTION
After turning the ignition switch is turned off, there may be a waiting time before disconnecting the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
28800 2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
88310A 3.REMOVE NO. 1 V BELT (w/ Air Conditioning System)
16361A 4.REMOVE FAN AND GENERATOR V BELT
27020 5.REMOVE GENERATOR ASSEMBLY
Remove the terminal cap.
Remove the nut and disconnect the generator wire from terminal B.
Disconnect the generator connector.
Detach the 2 wire harness clamps.
Remove the 2 bolts and generator assembly.