Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for Double Cab) › from 2022.09
RM25T0E _58 Vehicle Interior _029934 INTERIOR PANELS / TRIM _0142495 ROOF HEADLINING(for Double Cab) A

INTERIOR PANELS / TRIM  ROOF HEADLINING(for Double Cab)  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for RHD and LHD vehicles.

·

The procedure listed below is for LHD vehicles.



PROCEDURE

Hide 67914 1.REMOVE FRONT DOOR SCUFF PLATE LH

a.
B386294C01
0.906,1.792 1.365,1.323 true 0.76,1.802 1.073,1.958 0.313,0.156 10 false *1
*1 Protective Tape


Put protective tape around the front door scuff plate LH.


b.

Using moulding remover D, detach the 4 clips and remove the front door scuff plate LH.


Hide 67913 2.REMOVE FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 67918A 3.REMOVE REAR DOOR SCUFF PLATE LH

a.
B386295C01
2.448,1.896 2.802,2.021 false 2.854,1.969 3.167,2.125 0.313,0.156 10 false *1
*1 Protective Tape


Put protective tape around the rear door scuff plate LH.


b.

Using moulding remover D, detach the 2 clips and remove the rear door scuff plate LH.


Hide 67917A 4.REMOVE REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure described for the LH side.


Hide 62112A 5.REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH

a.
B386296

Remove the cap nut.


b.

Detach the clip and remove the cowl side trim sub-assembly LH.


Hide 62111A 6.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62414A 7.REMOVE LOWER CENTER PILLAR GARNISH LH

a.
B234861

Pull on both sides of the lower center pillar garnish LH and lift it up to remove it as shown in the illustration.


Hide 62413A 8.REMOVE LOWER CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62316C 9.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP LH

a.
B327801

Remove the front door rear opening trim weatherstrip LH.


Hide 62315E 10.REMOVE FRONT DOOR REAR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 62332C 11.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH

a.
B327802

Remove the rear door opening trim weatherstrip LH.


Hide 62331C 12.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure described for the LH side.


Hide 55356B 13.REMOVE INSTRUMENT PANEL PLATE LH

Hide 55355B 14.REMOVE INSTRUMENT PANEL PLATE RH

Hide 74617A 15.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74603 16.REMOVE FRONT ASSIST GRIP SUB-ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234353

for Type A:

Remove the 2 screws and front assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and front assist grip sub-assembly.


Hide 62212 17.REMOVE FRONT PILLAR GARNISH LH

a.
B234354

Detach the claw and clip and remove the front pillar garnish LH.


Hide 62211 18.REMOVE FRONT PILLAR GARNISH RH

a.
B234355

w/o Assist Grip:

i.

Using a clip remover, remove the 2 clips.

HINT:

Tape the clip remover tip before use.




b.
B235605

Detach the claw and clip and remove the front pillar garnish RH.


Hide 74630E 19.REMOVE REAR ASSIST GRIP ASSEMBLY LH

a.
B234858

for Type A:

Remove the 2 screws and rear assist grip assembly LH.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and rear assist grip assembly LH.


Hide 74620C 20.REMOVE REAR ASSIST GRIP ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 62412 21.REMOVE CENTER PILLAR GARNISH LH

a.
B233858C02
0.875,0.885 1.885,1.156 true 0.708,0.802 1.021,0.958 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and open the front seat belt shoulder anchor cover.

HINT:

Tape the screwdriver tip before use.



b.
B233859

Loosen the bolt and disconnect the front seat belt shoulder anchor.


c.
B234859

Detach the clip, 2 guides and remove the center pillar garnish LH.


Hide 62411 22.REMOVE CENTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 62639A 23.REMOVE QUARTER PILLAR GARNISH LH

a.
B233858C02
0.875,0.885 1.885,1.156 true 0.708,0.802 1.021,0.958 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and open the rear seat belt shoulder anchor cover.

HINT:

Tape the screwdriver tip before use.



b.
B233859

Loosen the bolt and disconnect the rear seat belt shoulder anchor.


c.
B327803

Using a clip remover, remove the 2 clips.

HINT:

Tape the clip remover tip before use.



d.

Detach the 4 clips and remove the quarter pillar garnish LH.


Hide 62638A 24.REMOVE QUARTER PILLAR GARNISH RH

HINT:

Use the same procedure described for the LH side.


Hide 74617C 25.REMOVE ASSIST GRIP PLUG

HINT:

Use the same procedure for all assist grip plugs.


a.
B234351C02
1.708,1.625 2.219,0.979 true 2.188,0.813 2.5,0.969 0.313,0.156 10 false *1
*1 Protective Tape


Using a screwdriver, detach the 2 claws and remove the assist grip plug.

HINT:

Tape the screwdriver tip before use.



Hide 74610A 26.REMOVE ASSIST GRIP SUB-ASSEMBLY

a.
B234352

for Type A:

Remove the 2 screws and assist grip sub-assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and assist grip sub-assembly.


Hide 74620B 27.REMOVE REAR ASSIST GRIP ASSEMBLY

HINT:

Use the same procedure for both front assist grip sub-assemblies.


a.
B234352

for Type A:

Remove the 2 screws and rear assist grip assembly.


b.

for Type B:

Using a T25 "TORX" wrench, remove the 2 screws and rear assist grip assembly.


Hide 81241 28.REMOVE NO. 1 ROOM LIGHT LENS

Hide 81240 29.REMOVE NO. 1 ROOM LIGHT ASSEMBLY

Hide 63312A 30.REMOVE NO. 2 ROOF HEADLINING

a.
B327804

Using a clip remover, remove the 6 clips.

HINT:

Tape the clip remover tip before use.



b.
B327807

Remove the No. 2 roof headlining from the rear door as shown in the illustration.

NOTICE:
·

Make sure wrinkles do not form in the No. 2 roof headlining during removal.

·

Make sure that the No. 2 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 2 roof headlining or vehicle interior.




Hide 74320 31.REMOVE VISOR ASSEMBLY LH

a.
B234361

Remove the 2 screws and visor assembly LH.


Hide 74310 32.REMOVE VISOR ASSEMBLY RH

HINT:

Use the same procedure described for the LH side.


Hide 74348 33.REMOVE VISOR HOLDER

HINT:

Use the same procedure for both visor holders.


a.
B234362

Remove the screw.


b.

Detach the clip and remove the visor holder.


Hide 87827 34.REMOVE INNER REAR VIEW MIRROR ABSORBER

Hide 87834 35.REMOVE INNER REAR VIEW MIRROR STAY HOLDER COVER

Hide 87810 36.REMOVE INNER REAR VIEW MIRROR ASSEMBLY

Hide 86466D 37.REMOVE NO. 1 FORWARD RECOGNITION COVER (w/ Pre-collision System)

Hide 63388G 38.REMOVE NO. 2 ROOF HEADLINING HOLDER COVER (w/ Pre-collision System)

a.
B666270

Detach the claw and guide and remove the No. 2 roof headlining holder cover.


Hide 63311A 39.REMOVE NO. 1 ROOF HEADLINING

a.

w/ Pre-collision System:

i.
B666269

Disconnect the 2 connectors.



b.
B327805

Using a clip remover, remove the 5 clips.

HINT:

Tape the clip remover tip before use.



c.
B327806

Remove the No. 1 roof headlining from the front door as shown in the illustration.

NOTICE:
·

Make sure wrinkles do not form in the No. 1 roof headlining during removal.

·

Make sure that the No. 1 roof headlining does not get caught on anything as it may become bent or damaged.

·

Do not damage the No. 1 roof headlining or vehicle interior.