23270 1.INSTALL FUEL PRESSURE PULSATION DAMPER ASSEMBLY
Apply a light coat of spindle oil or gasoline to a new O-ring and install the O-ring to the fuel pressure pulsation damper assembly.
Install the fuel pressure pulsation damper assembly to the fuel delivery pipe sub-assembly.
Install the fuel pressure regulator holder to the fuel pressure pulsation damper assembly.
2.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
3. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART
4.INSPECT FOR FUEL LEAK