Home › Engine / Hybrid System › 1GR-FE (FUEL) › FUEL PUMP RESISTOR › from 2022.09
RM25T0E _51 Engine / Hybrid System _029892 1GR-FE FUEL _0135861 FUEL PUMP RESISTOR A

1GR-FE FUEL  FUEL PUMP RESISTOR  INSTALLATION  


PROCEDURE

Hide 28380A 1.INSTALL FUEL PUMP RESISTOR

a.

Install the fuel pump resistor with the bolt.

Torque:
19.5 N*m (199 kgf*cm, 14 ft.*lbf)


b.

Connect the fuel pump resistor connector to the fuel pump resistor.


Hide 28800 2.INSTALL BATTERY

Hide 74481 3.INSTALL BATTERY HOLD DOWN CLAMP

a.

Attach the hook of the battery hold down clamp to the front battery bracket.


b.

Partially tighten the nut and temporarily install the bolt.


c.

Tighten the nut and bolt.

Torque:
for bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for nut : 5.0 N*m (51 kgf*cm, 44 in.*lbf)


d.

for Model Code #J79 Series:

Tighten the 2 nuts and bolt.

Torque:
for bolt : 8.0 N*m (82 kgf*cm, 71 in.*lbf)
for nut : 5.0 N*m (51 kgf*cm, 44 in.*lbf)


Hide 4.CONNECT CABLE TO POSITIVE BATTERY TERMINAL

Hide 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

Hide 6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL

HINT:

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART