НАСОС СИСТЕМЫ ОХЛАЖДЕНИЯ > УСТАНОВКА

1. INSTALL WATER PUMP ASSEMBLY

2. INSTALL TIMING BELT

3. INSTALL NO. 2 IDLE PULLEY ASSEMBLY

4. CONNECT COMPRESSOR AND MAGNETIC CLUTCH

5. INSTALL FAN SHROUD

6. INSTALL RADIATOR RESERVOIR

7. INSTALL NO. 2 RADIATOR HOSE

8. INSTALL NO. 1 RADIATOR HOSE

9. INSTALL RESONATOR WITH AIR CLEANER CAP

10. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

11. ADD ENGINE COOLANT

12. INSPECT FOR ENGINE COOLANT LEAK

13. INSTALL REAR ENGINE UNDER COVER ASSEMBLY

14. INSTALL NO. 1 ENGINE UNDER COVER SUB-ASSEMBLY

15. INSTALL FRONT BUMPER COVER LOWER

16. INSTALL UPPER RADIATOR SUPPORT SEAL