ЗАЗОР В ПРИВОДЕ КЛАПАНОВ > РЕГУЛИРОВКА

1. REMOVE RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

2. REMOVE INTAKE AIR CONNECTOR SUB-ASSEMBLY

3. REMOVE CYLINDER HEAD COVER SUB-ASSEMBLY

4. SET NO. 1 CYLINDER TO TDC/COMPRESSION

5. INSPECT VALVE CLEARANCE

6. ADJUST VALVE CLEARANCE

7. INSTALL CYLINDER HEAD COVER SUB-ASSEMBLY

8. INSTALL INTAKE AIR CONNECTOR SUB-ASSEMBLY

9. INSTALL RESONATOR WITH AIR CLEANER CAP SUB-ASSEMBLY

10. INSPECT ENGINE IDLE SPEED

11. INSPECT MAXIMUM ENGINE SPEED