ПРИВОДНОЙ РЕМЕНЬ ГАЗОРАСПРЕДЕЛЕНИЯ > УСТАНОВКА

1. INSTALL NO. 1 TIMING BELT IDLER SUB-ASSEMBLY

2. SET NO. 1 CYLINDER TO TDC/COMPRESSION

3. INSTALL TIMING BELT

4. CHECK NO. 1 CYLINDER TO TDC/COMPRESSION

5. INSTALL TIMING BELT GUIDE

6. INSTALL TIMING BELT COVER

7. INSTALL IDLE PULLEY ASSEMBLY

8. INSTALL CRANKSHAFT PULLEY

9. INSTALL VANE PUMP DRIVE PULLEY

10. INSTALL FAN SHROUD

11. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

12. INSPECT ENGINE IDLE SPEED

13. INSPECT MAXIMUM ENGINE SPEED