ECM > СНЯТИЕ

для подготовки Нажмите здесь



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY

  1. Remove the glove compartment door (See page Нажмите здесь).



2. REMOVE ECM


    A0096L1E01

  1. Disconnect the 4 connectors.
    Text in Illustration 
    *A
    		for LHD
    *B
    		for RHD

  1. Remove the bolt, nut and ECM.



3. REMOVE WIRE HARNESS CLAMP BRACKET (for LHD)


    A009600

  1. Remove the 2 screws and wire harness clamp bracket.



4. REMOVE NO. 1 ECM BRACKET


    A00966Z

  1. Remove the 2 screws and No. 1 ECM bracket.



5. REMOVE NO. 2 ECM BRACKET


    A0098B4E01

  1. Remove the 2 screws and No. 2 ECM bracket.
    Text in Illustration 
    *A
    		for LHD
    *B
    		for RHD