ПЕРЕДНИЙ САЛЬНИК КОЛЕНЧАТОГО ВАЛА > УСТАНОВКА

для подготовки Нажмите здесь



1. INSTALL FRONT CRANKSHAFT OIL SEAL


    A00JY4RE02

  1. Apply MP grease to the lip of a new oil seal.

  1. Using SST and a hammer, tap in the oil seal to a depth of 0.5 mm (0.0197 in.) from the oil pump case edge.

    SST
    09214-60010  



2. INSTALL CRANKSHAFT TIMING PULLEY


    A00JVXNE04

  1. Align the key groove of the timing pulley with the pulley set key.

  1. Using SST and a hammer, tap in the timing pulley with the flange side facing inward.

    SST
    09223-46011  
    Text in Illustration 
    *a
    		Inside



3. INSTALL TIMING BELT

  1. Install the timing belt (See page Нажмите здесь).