ДАТЧИК ТЕМПЕРАТУРЫ ВОЗДУХА НА ВПУСКЕ > ПРОВЕРКА

для подготовки Нажмите здесь



1. INSPECT INTAKE AIR TEMPERATURE SENSOR


    A0096C5E01

  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    		Condition
    		Specified Condition
    1 - 2
    		20°C
    		2.09 to 2.69 kΩ

    Text in Illustration 
    *1
    		Resistance kΩ
    *2
    		Temperature °C (°F)
    *3
    		Acceptable
    *a
    		Component without harness connected
    (Intake Air Temperature Sensor)
    If the result is not as specified, replace the intake air temperature sensor.

    ПРИМЕЧАНИЕ:
    When checking the sensor in water, keep the terminals dry. After the check, wipe the sensor dry.