ВЫХОДНОЙ ВАЛ > РАЗБОРКА

для подготовки Нажмите здесь



1. REMOVE NO. 3 SYNCHRONIZER RING

  1. Remove the No. 3 synchronizer ring from the output shaft.



2. REMOVE OUTPUT SHAFT CENTER BEARING

  1. Remove the output shaft center bearing from the output shaft.



3. REMOVE OUTPUT SHAFT REAR BEARING


    A009BGGE01

  1. Using SST and a press, remove the output shaft rear bearing from the output shaft.

    SST
    09950-00020  
    09950-60010   (09951-00510)
    09950-70010   (09951-07100)