Home › Vehicle Exterior › BODY PANEL › TORQUE FRONT BOX
BM37H0E _01 Vehicle Exterior _096506 BODY PANEL _0453124 TORQUE FRONT BOX F

BODY PANEL  TORQUE FRONT BOX  ASSEMBLY REPLACEMENT  


K160998

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

a.

Roughly cut open the panel so that the adhesive can be reached. Cut through the adhesive with a cut chisel to remove the panel.

HINT:

In cases where the adhesive cannot be removed with a cut chisel, heat the adhesive with an industrial heater gun or gas burner taking care not to cause panel deformation by overheating.


K160479C01
0,0 0,0 false
K108837

Adhesive - -


K160480

K160481



INSTALLATION


Symbol Meaning
K108823

Plug weld
K108825

Plug weld
K108827

Cut and Join Location
K108831

Butt Weld

a.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K143311C02
4.667,2.083 5,1.75 5,1.75 5.167,1.75 false 5.229,1.677 5.542,1.833 0.313,0.156 10 false *1
*1 FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY - -



b.

Apply adhesive (3MTM AutomixTM Panel Bonding Adhesive #8115).

HINT:
·

Do not apply adhesive around the plug welding points.

·

Minimize squeeze out in plug welding areas.



K160479C01
0,0 0,0 false
K108837

Adhesive - -


K160482

K160483


c.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.