With the body lower back panel assembly removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
| *A | LH Side | *B | RH Side |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Plug weld |
Before temporarily installing the new parts, weld the rear floor pan, rear floor pan reinforcement no.2, rear floor panel reinforcement and weld bolts with the standard number of welding points.
| *A | Upper Face | *B | Lower Face |
| *1 | REAR FLOOR PAN | *2 | REAR FLOOR PAN REINFORCEMENT NO.2 |
| *3 | REAR FLOOR PANEL REINFORCEMENT | *4 | WELD BOLTS |
| *A | LH Side | *B | RH Side |
After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.