Home › Vehicle Exterior › BODY PANEL › REAR FLOOR SIDE MEMBER
BM37H0E _01 Vehicle Exterior _096506 BODY PANEL _0453138 REAR FLOOR SIDE MEMBER F

BODY PANEL  REAR FLOOR SIDE MEMBER  ASSEMBLY REPLACEMENT  


K161019

With the quarter panel end housing assembly, rear floor pan assembly (pattern 2) and rear floor side panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.

a.

Bend in the same way as A.

K160630N01
6.146,2.25 6.583,0.917 6.583,0.917 6.75,0.917 false 6.844,0.833 7,1.031 0.156,0.198 10 false A

K160631



INSTALLATION


Symbol Meaning
K108823

Plug weld
K108824

Plug weld
K108825

Plug weld
K108830

Fillet Weld

a.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K160632C01
0.99,2.885 0.75,3.333 0.75,3.333 0.583,3.333 false 3.833,2.302 4.146,2.5 0.313,0.198 10 false *a 0.385,3.25 0.698,3.448 0.313,0.198 10 false *1
*1 REAR FLOOR SIDE MEMBER REAR - -
*a 9 mm (0.35 in.) - -


K160633


b.

After welding, apply body sealer and undercoating to the corresponding parts. (See the painting /coating)


c.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.