Home › Vehicle Exterior › BODY PANEL › LUGGAGE DOOR OPENING TROUGH
BM37H0E _01 Vehicle Exterior _096506 BODY PANEL _0453154 LUGGAGE DOOR OPENING TROUGH F

BODY PANEL  LUGGAGE DOOR OPENING TROUGH  ASSEMBLY REPLACEMENT  


K161012

With the quarter panel end housing assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points

K160598


INSTALLATION


Symbol Meaning
K108823

Plug weld
K108824

Plug weld
K108825

Plug weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)

K160599C01
1.25,3.25 1.417,3.25 1.417,3.25 1.76,2.813 false 1.5,2 1.667,2 1.667,2 2,2.417 false 2.333,1.083 2.5,1.083 2.5,1.083 2.771,1.865 false 1.083,3.167 1.396,3.365 0.313,0.198 10 false *1 1.333,1.917 1.646,2.115 0.313,0.198 10 false *2 2.167,1 2.479,1.198 0.313,0.198 10 false *3
*1 LUGGAGE COMPARTMENT OPENING TROUGH *2 QUARTER PANEL EXTENSION REINFORCEMENT
*3 QUARTER WHEEL HOUSE BRACE - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting /coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.